BBI 221151 Shoulder Screw, Round Socket Head, Alloy Steel, 1/2 in Dia x 4-1/2 in L Shoulder, 3/8-16
BBI 221151 Shoulder Screw, Round Socket Head, Alloy Steel, 1/2 in Dia x 4-1/2 in L Shoulder, 3/8-16
-
BrandBBI
-
Manufacturer Part Number221151
-
CountryUSA
-
FinishPlain/Thermal Black Oxide
-
MaterialAlloy Steel
-
Thread TypeUNC
-
Measurement SystemImperial
-
HardnessHRC 36-43
-
Head TypeRound Socket
-
Shoulder Diameter1/2 in
-
Diameter - Thread Size3/8-16
-
Shoulder Length4-1/2 in
-
Drive Size1/4 in
-
Drive TypeHex
-
UNSPSC31161517
-
Package Description25/CS
-
Standards/ApprovalsASME/ANSI B18.3-2002
-
Catalog
Recently Viewed
BBI 221151 Shoulder Screw, Round Socket Head, Alloy Steel, 1/2 in Dia x 4-1/2 in L Shoulder, 3/8-16
BBI 221151 Shoulder Screw, Round Socket Head, Alloy Steel, 1/2 in Dia x 4-1/2 in L Shoulder, 3/8-16
Dichtomatik N70217 O-Ring, 217 Dash Number, 1.171 in ID x 1.449 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Dichtomatik N70364 O-Ring, 364 Dash Number, 6.725 in ID x 7.145 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Stanley Proto J2735SW Heavy Duty 6 Point Straight Striking Wrench 2-3/16 Inch
Stanley Proto J2735SW Heavy Duty 6 Point Straight Striking Wrench 2-3/16 Inch-PROJ2735SW
BBI 042444 Partially Threaded Cap Screw, 5/8-11, 3-1/2 in L Under Head, 8 Grade, Alloy Steel, Zinc Yellow Bake CR+6
BBI 042444 Partially Threaded Cap Screw, 5/8-11, 3-1/2 in L Under Head, 8 Grade, Alloy Steel, Zinc Yellow Bake CR+6
Browning® 1046093 VP Series Type 5 Variable Pitch Sheave, 1-3/8 in Finished Bore, 5.95 in OD, 2 Grooves, 4.4 to 5.4 in (A/4L)/4.7 to 5.9 in (B/5L/5V) Dia Pitch, 1-5/8 to 2-3/8 in W Face
The principle of a variable pitch sheave is that the threaded angular faced discs forming the V-shaped groove in which the belt rides are movable. VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore. The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with. When the discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed. When the discs are moved away from each other, the belt rides lower and the pitch diameter is smaller decreasing the driven speed. The common term for this speed adjustment is called number of turns open from closed position.
