BBI 221172 Shoulder Screw, Round Socket Head, ASTM A574 Alloy Steel, 5/8 in Dia x 2-1/4 in L Shoulder, 1/2-13
BBI 221172 Shoulder Screw, Round Socket Head, ASTM A574 Alloy Steel, 5/8 in Dia x 2-1/4 in L Shoulder, 1/2-13
-
BrandBBI
-
Manufacturer Part Number221172
-
CountryUSA
-
FinishPlain/Thermal Black Oxide
-
MaterialASTM A574 Alloy Steel
-
Thread TypeUNC
-
Measurement SystemImperial
-
HardnessHRC 36-43
-
Head TypeRound Socket
-
Shoulder Diameter5/8 in
-
Diameter - Thread Size1/2-13
-
Shoulder Length2-1/4 in
-
Drive Size5/16 in
-
Drive TypeHex
-
UNSPSC31161517
-
Package Description25/CS
-
Standards/ApprovalsASME/ANSI B18.3-2002
-
Catalog
Recently Viewed
BBI 221172 Shoulder Screw, Round Socket Head, ASTM A574 Alloy Steel, 5/8 in Dia x 2-1/4 in L Shoulder, 1/2-13
BBI 221172 Shoulder Screw, Round Socket Head, ASTM A574 Alloy Steel, 5/8 in Dia x 2-1/4 in L Shoulder, 1/2-13
Browning® 1296458 T45L Automatic Torque Limiter, 1-3/16 in Finished Bore, 4-1/2 in OD, 2800 in-lb (1-Spring)/4900 in-lb (2-Spring) Torque
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
Dichtomatik N70208 O-Ring, 208 Dash Number, 0.609 in ID x 0.887 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
ECC-EZ-205 Dodge® 128961 Metal Detectable Snap On Closed End Cover, 2-11/64 in OD, 3-1/16 in W, High-Density Polyethylene (HDPE) Housing, Blue
All Dodge® E-Z-Kleen® and Ultra Kleen™ bearings include a housing groove to accept a snap-on polymer end cover. These durable covers are easy to install and each is provided with a drain hole to prevent moisture from collecting inside the cover. The snap-on style of end cover incorporates an additional lip on the mounting surface for a rigid fit within the housing. This tight fit creates a better seal prevents movement of the cover during operation and high pressure cleaning. Dodge® snap-on end covers provide positive sealing in wet environments and create safer working conditions by enclosing rotating shafts.
FYH® SAA210 31FP7 SAA Cylindrical Ball Bearing Insert, 1-7/8 in Dia Bore, 3.54 in OD, 1.72 in W, 35.1 kN Dynamic/23.3 kN Static Load
FYH® SAA210 31FP7 SAA Cylindrical Ball Bearing Insert, 1-7/8 in Dia Bore, 3.54 in OD, 1.72 in W, 35.1 kN Dynamic/23.3 kN Static Load
70000-BTU HEATER SPARK PLUG-DYGSPKFA1008 >
