BBI 693370 Teks® Fully Threaded Self-Drilling Screw, #8-18, 1/2 in OAL, Pan Head, Phillips® Drive, Low Carbon Steel, Zinc CR+3, Drill Point
BBI 693370 Teks® Fully Threaded Self-Drilling Screw, #8-18, 1/2 in OAL, Pan Head, Phillips® Drive, Low Carbon Steel, Zinc CR+3, Drill Point
-
BrandBBI
-
Manufacturer Part Number693370
-
CountryUSA|Canada
-
FinishZinc CR+3
-
Point Size#2
-
Point TypeDrill
-
MaterialLow Carbon Steel
-
Measurement SystemImperial
-
TypeFully Threaded
-
Head TypePan
-
SeriesTeks®
-
Diameter - Thread Size#8-18
-
Drive TypePhillips®
-
Overall Length1/2 in
-
UNSPSC31161528
-
Package Description100/CS
Recently Viewed
BBI 693370 Teks® Fully Threaded Self-Drilling Screw, #8-18, 1/2 in OAL, Pan Head, Phillips® Drive, Low Carbon Steel, Zinc CR+3, Drill Point
BBI 693370 Teks® Fully Threaded Self-Drilling Screw, #8-18, 1/2 in OAL, Pan Head, Phillips® Drive, Low Carbon Steel, Zinc CR+3, Drill Point
Browning® 1079052 Split Taper Bushing, 2-1/8 in Dia Bore, 2.7657 in Small End/2.875 in Large End Dia Barrel, 4-1/8 in Dia Flange, 2-1/2 in OAL, Sintered Steel
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
Williams® JHW7039B SUPERTORQUE® Double Headed Box End Wrench, 1-1/4 x 1-5/16 in Wrench, 12 Points, 10 deg Offset, 17-5/8 in OAL, Satin Chrome
Williams® JHW7039B SUPERTORQUE® Double Headed Box End Wrench, 1-1/4 x 1-5/16 in Wrench, 12 Points, 10 deg Offset, 17-5/8 in OAL, Satin Chrome
Lift-All® EE1000X26 EE Eye and Eye Sling, 26 ft L, 90000 lb, Polyester, Black
Milwaukee® 49-57-2370 Heavy Duty Annular Cutter, 2-3/8 in Dia Cutter, 2 in D Cutting, Uncoated, Threaded Shank
Drill holes up to 3X faster than twist drill bits with the Milwaukee® 2-3/4 in. threaded Steel Hawg® cutter. This long-lasting cutter features Carbide teeth and an alternating cutting pattern to cut up to a 2 in. hole depth in steel, stainless steel, cast iron or aluminum. The spring-loaded, self-ejecting pin lets you make smoother, more accurate cuts and eject the plug faster. The Steel Hawg cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0030 on Milwaukee's 4262-1 magnetic drill press or arbor 49-57-0010 on Milwaukee's 4292-1 mag press. The 2-3/4 in. bit diameter has a metric thread size of M18 x 1.5 in. shank. Use the threaded Steel Hawg with a No. 3 Morse taper arbor assembly 49 to 57 - 0010.
5-5/8" CABINET DOOR/DRAWER PULLS-JWH224260>
