3/8" X 3-1/2" Split Roll Pins
3/8" X 3-1/2" Split Roll Pins
-
BrandGeneric
-
Manufacturer Part NumberNBS2810380350
Recently Viewed
3/8" X 3-1/2" Split Roll Pins
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
Justrite® 08300 Horizontal Drum Vent, 2 in NPT/NPS Bung, For Use With 205 L Petroleum Based Solvent Drums, Brass, Brass
Automatic pressure relief ensures safe workplace. No more worrying about pressure building up in your drums. These safety drum vents automatically relieve pressure between 3 and 8 psi (30 to 55 kPa). Vents are tested to allow 61 cubic inch (1-L) of water through a 3/8-in (9.5-mm) pipe nipple in less than 6 seconds. Keep the vent in closed position to prevent flammable vapor from escaping. A built-in flame arrester helps absorb and dissipate heat for added safety. Vacuum relief is automatic on vertically installed vents and manual on horizontally installed vents. Drum vents are FM Approved. For protection and avoidance of high-pressure drum failure while dispelling heat using its flame arrestor.
10" WIRE WHEEL BRUSH - WEI03190>
Tool Type: Side-cutting lineman’s pliers. Total Length: 7-1/4 inches (7.25").High-Leverage Pivot: Built with the joint rivet positioned closer to the cutting edges to yield significantly more cutting power compared to standard multi-purpose pliers. Jaws: Features diamond-serrated gripping tips optimized for twisting, pulling, and splicing heavy wire.
WORM GEAR DOUBLE THREAD CAST IRON RIGHT HAND 1-1/8" X 1-3/4"-BRWCWG12502 >
