BBI 502132 Full Thread Tap Bolt, 3/8-16, 2 in L Under Head, 5 Grade, Medium Carbon Steel, Zinc CR+3
BBI 502132 Full Thread Tap Bolt, 3/8-16, 2 in L Under Head, 5 Grade, Medium Carbon Steel, Zinc CR+3
-
BrandBBI
-
Manufacturer Part Number502132
-
CountryUSA
-
FinishZinc CR+3
-
Tensile Strength120000 psi
-
MaterialMedium Carbon Steel
-
Thread TypeUNC
-
Measurement SystemImperial
-
TypeFull Thread
-
Grade5
-
Hardness25 to 34 HRC
-
Head Size1/4 in H
-
Head TypeHex
-
Diameter - Thread Size3/8-16
-
Length Under Head2 in
-
UNSPSC31161620
-
Package Description50/CS
-
Standards/ApprovalsASME B18.2.1
-
Catalog
Recently Viewed
BBI 502132 Full Thread Tap Bolt, 3/8-16, 2 in L Under Head, 5 Grade, Medium Carbon Steel, Zinc CR+3
BBI 502132 Full Thread Tap Bolt, 3/8-16, 2 in L Under Head, 5 Grade, Medium Carbon Steel, Zinc CR+3
ALAN 18-TFFN-BRN 18 AWG, TFFN, STRANDED COPPER, 600V, FIXTURE WIRE, BROWN
TFFN WIRE IS A BUILDING WIRE WITH THE SAME APPLICATIONS AS THHN WIRE. THIS WIRE IS ALSO MADE OF THERMOPLASTIC MATERIALS, IT IS HIGHLY FLEXIBLE BUT AVAILABLE IN A SMALLER GAUGE RANGE. TFFN WIRE IS CLASSIFIED AS A FIXTURE WIRE.
L-ALE18TFFNBRN >
The DiversiTech® 37050H Motor Run Capacitor Oval, 5µF, 370 volts are guaranteed for 10,000 hours of life under normal operating conditions. They have an operating life of 94% at 60,000 hours. They are single capacitance, and designed for continuous run.
Thomson® Super Ball Bushing® SUPER16 Adjustable Closed Linear Bearing, 1 in Dia Shaft, 1-9/16 in OD, 2-1/4 in L
The Super Ball Bushing® bearing has been the industry standard for self-aligning linear bearings for over twenty years. This bearing provides three times the load capacity or 27 times the travel life of conventional linear bearings. Besides the dramatic increase in load capacity, the Super Ball Bushing® bearing is self-aligning, lightweight and adjustable with a low coefficient of friction. It is a quick and easy replacement for high friction plain bearings. The wear-resistant, engineered-polymer retainers and outer sleeves reduce inertia and noise in critical, high speed applications.
Milwaukee® 49-80-0305 Reduction Nozzle, For Use With 8978-20, 8986-20 or 8988-20 Heat Gun, 3/8 in Dia
The 49-80-0305 air reduction nozzle can be used with Milwaukee heat guns 8978-20, 8986-20, and 8988-20 for applications where intensified, spot directed heat is needed for corners, bending Plexiglas or soldering. Includes nozzle only.
Precision Brand® 42910 Plain Slotted Shim Kit, 0.001 in THK Min, 3 in W x 3 in L, 300 Stainless Steel
Assortment contains 20 each of the following thicknesses: 0.001 in, 0.002 in, 0.003 in, 0.004 in, 0.005 in, 0.01 in, 0.015 in, 0.02 in, 0.025 in, 0.05 in, 0.075 in, 0.1 in and 0.125 in. Made from a 300 series stainless steel that resists rust and corrosion. Size B - 3 x 3 in. Slot size - 7/8 in. Packaged in a durable metal box. Precision Brand® Slotted shim is the best way to solve alignment and leveling problems on motors, pumps, generators and other plant machinery. Slotted shims are economical, safe and accurate. Reduce labor costs by eliminating hand cutting and reduce downtime by eliminating shim preparation.
