BBI 500104 Full Thread Tap Bolt, 3/8-16, 2-1/4 in L Under Head, A Grade, Low Carbon Steel, Zinc CR+3
BBI 500104 Full Thread Tap Bolt, 3/8-16, 2-1/4 in L Under Head, A Grade, Low Carbon Steel, Zinc CR+3
-
BrandBBI
-
Manufacturer Part Number500104
-
CountryUSA
-
FinishZinc CR+3
-
Tensile Strength60000 psi
-
MaterialLow Carbon Steel
-
Material SpecificationASTM A307
-
Thread TypeUNC
-
Measurement SystemImperial
-
TypeFull Thread
-
GradeA
-
Hardness69 to 100 HRB
-
Head Size15/64 in H
-
Head TypeHex
-
Diameter - Thread Size3/8-16
-
Length Under Head2-1/4 in
-
UNSPSC31161600
-
Package Description50/CS
Recently Viewed
BBI 500104 Full Thread Tap Bolt, 3/8-16, 2-1/4 in L Under Head, A Grade, Low Carbon Steel, Zinc CR+3
BBI 500104 Full Thread Tap Bolt, 3/8-16, 2-1/4 in L Under Head, A Grade, Low Carbon Steel, Zinc CR+3
SYNTHETIC POLYOLEFIN FILAMENT BRISTLES. SQUARED TRIMMED, PROCESSED TIP. YELLOW PLASTIC HANDLE. NOT RECOMMENDED FOR ONE COAT PAINTS. FOR USE WITH POLYBAG AND ADHESIVES.
-JWH772186 >
MORSE® 58108 5940 Ball Nose Center Cutting Regular Length Single End End Mill, 1/8 in Dia Cutter, 1/2 in Length of Cut, 2 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, Bright
BBI 451009 Partially Threaded Cap Screw, 1-1/8-7, 6-1/2 in L Under Head, 8 Grade, Alloy Steel, Plain
BBI 451009 Partially Threaded Cap Screw, 1-1/8-7, 6-1/2 in L Under Head, 8 Grade, Alloy Steel, Plain
1-OZ BLACK PAINT COLORANT-BLPB >
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
