1/2" X 1-1/4" Clip Head Plow Bolt
1/2" X 1-1/4" Clip Head Plow Bolt
-
BrandGeneric
-
Manufacturer Part NumberNBS1410500125
Recently Viewed
1/2" X 1-1/4" Clip Head Plow Bolt
nVent ERICO 815880UPC Pointed Ground Rod, 5/8 in Nominal, 8 ft OAL, Steel, Hot Dip Galvanized
nVent ERICO 815880UPC Pointed Ground Rod, 5/8 in Nominal, 8 ft OAL, Steel, Hot Dip Galvanized
Drillco 437E108 4375E Imperial Chucking Reamer, 1/8 in Dia x 3-1/2 in OAL, Straight Shank, Spiral Flute
Straight Shank Chucking Reamers are designed for general purpose reaming in machines such as drill presses, turret lathes, and screw machines. They have shorter and deeper flutes than hand reamers. For machine reaming.
All position welding, low hydrogen rod for general purpose AC applications requiring low penetration, can also be used on DC+. Designed for welding head enable steels and projects involving hard to weld steels including thick sections and restrained joints with cracking issues. Not recommended for use with low open circuit voltage (OCV) power sources. Excellent for tack welds and out of position welding
1/4" X 36" Square Plain Keystock
Browning® 1296417 T45L Automatic Torque Limiter, 3/4 in Finished Bore, 4-1/2 in OD, 2800 in-lb (1-Spring)/4900 in-lb (2-Spring) Torque
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
