BBI 830494 Hex Bolt/Screw, M12x1.75, 40 mm L Under Head, A2-70 Grade, Stainless Steel
BBI 830494 Hex Bolt/Screw, M12x1.75, 40 mm L Under Head, A2-70 Grade, Stainless Steel
-
BrandBBI
-
UPC662403714030
-
Manufacturer Part Number830494
-
CountryUSA
-
MaterialStainless Steel
-
Thread TypeUNC
-
Measurement SystemMetric
-
GradeA2-70
-
Head Size7.68 mm H
-
Head TypeHex
-
Diameter - Thread SizeM12x1.75
-
Length Under Head40 mm
-
UNSPSC31161501
-
Package Description50/CS
-
Standards/ApprovalsDIN 931/933
Recently Viewed
BBI 830494 Hex Bolt/Screw, M12x1.75, 40 mm L Under Head, A2-70 Grade, Stainless Steel
BBI 830494 Hex Bolt/Screw, M12x1.75, 40 mm L Under Head, A2-70 Grade, Stainless Steel
Browning® 765813 VPS 200 Normal Duty Pillow Block Ball Bearing, 1-15/16 in Dia Bore, 5-23/32 to 6-21/32 in L Bolt Center-to-Center, 2-1/4 in Base to Bore Centerline, 8 in OAL x 4-9/16 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
WATTS® 0780320 Heavy Duty Float Valve Stem, 5/16 in NPT, Brass
This 5/16 IN OD, 12 inch heavy duty brass threaded stem is designed for use with float valve to control high capacity water flow in commercial, industrial and agricultural applications. It is made of heavy duty brass with 5/16-18 inch NPT threaded ends for valve and float.
60" X 30" FORMICA WORKBENCH TOPS-HLW6000SE6030>
WORK BENCH BACK/END STOPS-HLW95827230>
NACHI 7212B Angular Contact Ball Bearing, 60 mm Dia Bore, 110 mm OD, 1 Row, 22 mm W, 40 deg, 58000 N Dynamic/46000 N Static Load
The single-row angular contact ball bearing was designed to support radial, axial or composite loads, however, the axial load must be in one direction. The high thrust capacity is achieved by a higher shoulder on one side of the outer ring. A matching high shoulder is often on the opposite side of the inner ring as well. The direction of the load through the balls forms the contact angle. The thrust capacity increases with the contact angle. This ball bearing has a 40 deg contact angle. This bearing has a stamped steel cage and is not available with seals or shields. These bearings are non-separable. These bearings have normal tolerances and are not suitable for mounting adjacent to each other to achieve a preload.
