NIBCO® 851-015 1-Piece Solid Flange, 1-1/2 in, PVC, Socket, 150 lb, 5-1/32 in OD, Domestic
NIBCO® 851-015 1-Piece Solid Flange, 1-1/2 in, PVC, Socket, 150 lb, 5-1/32 in OD, Domestic
-
BrandLasco®
-
UPC025528722029
-
Manufacturer Part Number851-015
-
CountryUSA
-
Temperature Rating73.4 deg F
-
Thickness11/16 in
-
MaterialPVC
-
Pressure Class150 lb
-
Pressure Rating150 psi
-
Type1-Piece Solid
-
Connection TypeSocket
-
Schedule RatingSCH 80/XH
-
Nominal Size1-1/2 in
-
Domestic/ImportDomestic
-
Outside Diameter5-1/32 in
-
Length Through Hub1-9/16 in
- ASTM D-1784: Rigid PVC compounds and chlorinated PVC (CPVC) compounds
- Do not use Lasco® fittings for compressed air or gases
- Do not test PVC piping systems with compressed air or gases
- Do not use fittings with liquids not recommended by Lasco®
- Fitting modification voids the warranty
-
UNSPSC40174000
-
Package Description10/CTN
-
Standards/ApprovalsASTM D1784|ASTM D2464|ASTM D2467|ASTM F1970|ANSI B16.5|NSF Approved
-
WarrantyLimited
-
Catalog
-
Specification Sheet
Recently Viewed
NIBCO® 851-015 1-Piece Solid Flange, 1-1/2 in, PVC, Socket, 150 lb, 5-1/32 in OD, Domestic
NIBCO® 851-015 1-Piece Solid Flange, 1-1/2 in, PVC, Socket, 150 lb, 5-1/32 in OD, Domestic
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
HCI Preferred Supplier 38136 Tube-to-Pipe Branch Tee, 1/4 x 1/4 x 1/8 in, Nylon AB x Nylon AB x Male NPTF, CA360 Brass
HCI Preferred Supplier 38136 Tube-to-Pipe Branch Tee, 1/4 x 1/4 x 1/8 in, Nylon AB x Nylon AB x Male NPTF, CA360 Brass
3/8" X 2-1/4" USS GR-5 Plow Bolts
1/4" MEXICAN SISAL ROPE--100' PER ROLL-JWH739623 >
The single-row angular contact ball bearing was designed to support radial, axial or composite loads, however, the axial load must be in one direction. The high thrust capacity is achieved by a higher shoulder on one side of the outer ring. A matching high shoulder is often on the opposite side of the inner ring as well. The direction of the load through the balls forms the contact angle. The thrust capacity increases with the contact angle. This ball bearing has a 40 deg contact angle. This bearing has a stamped steel cage and is not available with seals or shields. These bearings are non-separable. These bearings have normal tolerances and are not suitable for mounting adjacent to each other to achieve a preload.
