Crosby® 1046029 M-279 Full Threaded Machinery Eye Bolt, M24x3, 36 mm L Shank, Forged Steel
Crosby® 1046029 M-279 Full Threaded Machinery Eye Bolt, M24x3, 36 mm L Shank, Forged Steel
-
BrandCrosby®
-
UPC662547460299
-
Manufacturer Part Number1046029
-
CountryUSA
-
MaterialForged Steel
-
Measurement SystemMetric
-
TypeFull Threaded Machinery
-
SeriesM-279
-
Working Load4000 lb
-
Shank Length36 mm
-
Diameter - Thread SizeM24x3
-
Inside Eye Diameter51 mm
-
Outside Eye Diameter95.5 mm
-
Overall Length142 mm
- Working load limits shown are for in-line pull
- Fatigue rated at 1-1/2 times the working load limit at 20000 cycles
- Recommended for in-line pull
- Importantly, these bolts meet other critical performance requirements including fatigue life, impact properties and material traceability
-
UNSPSC31161610
-
Standards/ApprovalsASME B30.26
-
Catalog
Recently Viewed
Crosby® 1046029 M-279 Full Threaded Machinery Eye Bolt, M24x3, 36 mm L Shank, Forged Steel
Crosby® 1046029 M-279 Full Threaded Machinery Eye Bolt, M24x3, 36 mm L Shank, Forged Steel
Gates® Power Transmission MegaCrimp™ 12G-16MP G25 Straight Hydraulic Coupling, 3/4 in x 1-11-1/2 Nominal, Hose x Male NPTF, Steel
It’s what’s inside the MegaCrimp coupling that makes it perform so well, the “C” insert. This “C” insert allows usage with different hose constructions and wall thicknesses. In addition, the C-insert ensures an even distribution of crimping forces to form a concentric seal. That simplifies your inventory requirements since one size can accommodate many different hose ODs, on both one- and two-wire braid hoses and select Xpiral hoses. An additional bonus: MegaCrimp couplings are fully qualified for SAE, EN, and ISO performance.
1-3/16" -ID SPHERICAL OD INSERT BEARING-FYHNA30619 >
Pyramex® SMB1880S Safety Eyewear, Anti-Scratch, Indoor/Outdoor Mirror Lens, Wrap Around Frame, Metallic Blue, Nylon 6.6 Frame, Polycarbonate Lens, ANSI P Z87.1, CAN/CSA Z94.3-15, CE EN166, MIL-PRF 32432
metabo® 623495000 Non-Woven Abrasive Sleeve, 4 in W x 3-9/16 in L, Medium Grade
metabo® 623495000 Non-Woven Abrasive Sleeve, 4 in W x 3-9/16 in L, Medium Grade
Dichtomatik 75102381 O-Ring, 912 Dash Number, 0.924 in ID x 1.156 in OD, FKM, 75 Shore A Durometer, Import, Custom 912-VITON
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
