Proto Tools 7/8"-9 X 2-1/4" EYEBOLT W/SHOULDER PRO J-94028
Proto® J94028 Full Threaded Shoulder Pattern Eye Bolt, 7/8-9, 2-1/4 in L Shank, Forged Steel, Plain
-
BrandProto®
-
UPC662679490232
-
Manufacturer Part NumberJ94028
-
CountryUSA
-
FinishPlain
-
Thread Length2-1/4 in
-
MaterialForged Steel
-
Material SpecificationASME B18.15
-
Thread TypeUNC-2A
-
Measurement SystemImperial
-
TypeFull Threaded Shoulder Pattern
-
Working Load7000 lb
-
Shank Length2-1/4 in
-
Diameter - Thread Size7/8-9
-
Inside Eye Diameter1.56 to 1.69 in
-
Outside Eye Diameter3.19 in
-
Overall Length6.19 in
- Maximum load ratings for eye bolts are drastically reduced when loading at an angle
- Angular loads should be avoided whenever possible
- For angular loads of 15 deg or more
- Certified mercury free
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 4R267 |
-
UNSPSC31161610
-
Standards/ApprovalsASME B18.15
-
Catalog
Recently Viewed
Proto® J94028 Full Threaded Shoulder Pattern Eye Bolt, 7/8-9, 2-1/4 in L Shank, Forged Steel, Plain
Coilhose® CL690404S Coilock® Swivel Tube To Pipe Elbow, 1/4 in Nominal, Tube x MNPT, Import
Coilhose® CL690404S Coilock® Swivel Tube To Pipe Elbow, 1/4 in Nominal, Tube x MNPT, Import
HCI Preferred Supplier 46101 Shut-Off Cock, 1/4 in Nominal, Male Flare x MIP End Style, Forged Brass Body
HCI Preferred Supplier 46101 Shut-Off Cock, 1/4 in Nominal, Male Flare x MIP End Style, Forged Brass Body
DeWALT® DDF1351400 Safety Strip, 0.27 Caliber, Yellow, 4 Level, Strip, For Use With DDF212035P, DDF2120350 DEWALT, 52000, 52001, 52019, 52025, 52010, 50266, 52051 Power, SA270, XT540, Cobra, Viper Ramset, DX 36, DX 460 Hilti® and 12700 Duofast
Used as in-line protection for fluorescent fixtures, the Littelfuse® LGR and LMF series fuses and LHR holder offer increased safety and reliability to lighting systems. On a 277 VAC system a fault occurring in an un-fused fixture could take out the entire branch circuit affecting upto 100 fixtures. This could cause safety problems as well as shut down operations. By individually fusing fixtures, these problems will be avoided. The added benefits of this is the ability to quickly identify the problem fixture and reduce the repair time. Fuse holders are rated upto 10 A at 300 VAC and are equipped with 7 in 18 AWG leads. Order part number LHR 000 for two leads and part number LHR 001 for one lead and one terminal for insertion of 18 AWG ballast lead.
HCI Preferred Supplier 20082C Swivel Elbow, 1/4 in Nominal, Tube x MNPT, 0 to 150 psi Pressure, Brass/Composite Polyacetal
HCI Preferred Supplier 20082C Swivel Elbow, 1/4 in Nominal, Tube x MNPT, 0 to 150 psi Pressure, Brass/Composite Polyacetal

