Crosby® 1043276 G-291-15/16 X 2 1/4 Eye Bolt With Regular Nut, 5/16 in, 2-1/4 in L Shank, Forged Steel, Hot Dipped Galvanized
Crosby® 1043276 G-291 Eye Bolt With Regular Nut, 5/16 in, 2-1/4 in L Shank, Forged Steel, Hot Dipped Galvanized
-
BrandCrosby®
-
UPC662547432760
-
Manufacturer Part Number1043276
-
CountryUSA
-
FinishHot Dipped Galvanized
-
Thread Length1-1/2 in
-
MaterialForged Steel
-
Thread TypeUNC
-
Measurement SystemImperial
-
SeriesG-291
-
Working Load1200 lb
-
Shank Length2-1/4 in
-
Diameter - Thread Size5/16 in
-
Inside Eye Diameter0.62 in
-
Outside Eye Diameter1-1/4 in
-
Overall Length3.56 in
- Fatigue rated at 1-1/2 times the working load limit at 20000 cycles
- Hot dip galvanized after threading (UNC)
- Furnished with standard hot dip galvanized hex nuts
- Recommended for in-line pull
- Importantly, these bolts meet other critical performance requirements including fatigue life, impact properties and material traceability
-
UNSPSC31161610
-
Standards/ApprovalsASME B30.26|CE Certified
-
Catalog
Recently Viewed
Crosby® 1043276 G-291-15/16 X 2 1/4 Eye Bolt With Regular Nut, 5/16 in, 2-1/4 in L Shank, Forged Steel, Hot Dipped Galvanized
Crosby® 1043276 G-291 Eye Bolt With Regular Nut, 5/16 in, 2-1/4 in L Shank, Forged Steel, Hot Dipped Galvanized
Browning® Classical Gripbelt® 1042258 AK Series Type 3 Single Groove Sheave, Split Taper Bore, 3/8 to 1-1/2 in Dia Bore, 7-3/4 in OD, 7.7 in (A)/7.16 in (3L) Dia Pitch, 3/4 in W Face
10-OZ CAN OF POLISHING COMPOUND-TURT241 >
2 -MALE PIPE THREADX8 GALVANIZED NIPPLE
54-MM SMOKE CLEAR SAFETY GLASSES-SSS46410 >
Gates® Power Transmission MegaCrimp™ 16G-16FJX90M G25 Medium Bent Tube Hydraulic Coupling, 1 in x 1-5/16-12 Nominal, Hose x 37 deg Female JIC Flare Swivel, Steel
It’s what’s inside the MegaCrimp coupling that makes it perform so well, the “C” insert. This “C” insert allows usage with different hose constructions and wall thicknesses. In addition, the C-insert ensures an even distribution of crimping forces to form a concentric seal. That simplifies your inventory requirements since one size can accommodate many different hose ODs, on both one- and two-wire braid hoses and select Xpiral hoses. An additional bonus: MegaCrimp couplings are fully qualified for SAE, EN, and ISO performance.
