POWERS 3/8" X 2-1/4" ZINC CONCRETE ANCHOR PWR 7410
The Power-Stud anchor is a fully threaded, torque-controlled, wedge expansion anchor. It is available in threaded, rod hanger and tie-wire versions suitable for applications in solid concrete and grout filled concrete masonry. The carbon steel threaded version is suitable for a variety of applications. The drill bit diameter necessary for proper installation is the same as the anchor diameter.
-
BrandDeWALT®
-
UPC075352775937
-
Manufacturer Part Number7410SD1
-
CountryUSA|Canada
-
FinishZinc Plated
-
Tensile Strength2685 lb
-
Thread Length7/8 in
-
MaterialCarbon Steel
-
Thread Size3/8-16
-
Thread TypeUNC
-
Maximum Work Thickness1/4 in
-
Minimum Embedment Depth1-5/8 in
-
TypeExpansion
-
Head TypeHex
-
SeriesSD1
-
Shear Strength2540 lb
-
Diameter3/8 in
-
Drill Size3/8 in
-
Overall Length2-1/4 in
- Consistent performance in high and low strength concrete
- Length ID code and identifying marking stamped on head of each Anchor
- Ultimate load capacity: 2240 lb tensile strength when embedded in 2500 psi, 2685 lb tensile strength when embedded in 3000 psi and 3100 lb tensile strength when embedded in 4000 psi compressive strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Anchor design allows for follow-up expansion after setting under tensile loading ultimate pullout 5440 lb
- Normal weight concrete, structural sand-light weight concrete, concrete over steel deck and grouted concrete masonry are applicable materials
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 3A445 |
-
Alternative Part Number7410SD1-PWR
-
UNSPSC31162102
-
Package Description50/BX
-
Standards/ApprovalsICC-ES AC01, ESR-2818/2966|UL Listed|2015 IBC/IRC|ACI 318-14 Chapter 17|ACI 318-11/08 Appendix D|ACI 355.2|ASTM E488|Evaluated and Qualified by an Accredited Independent Testing Laboratory|FM Approved|ICC-ES AC193|UL EX1289
-
Catalog
-
Specification Sheet
Recently Viewed
The Power-Stud anchor is a fully threaded, torque-controlled, wedge expansion anchor. It is available in threaded, rod hanger and tie-wire versions suitable for applications in solid concrete and grout filled concrete masonry. The carbon steel threaded version is suitable for a variety of applications. The drill bit diameter necessary for proper installation is the same as the anchor diameter.
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
The Spike® is a, one-piece, vibration-resistant Anchor for use in concrete block or stone. Several head styles, including tamperproof versions and Anchor materials are available. The Spike® Anchor is formed with an "s" shaped configuration at the working end of the Anchor to create an expansion mechanism. Since the Anchor is pre-formed, there is no secondary tightening operation required which greatly reduces the overall cost of an Anchor installation.
Proto® J350 Tubing Cutter, 1/8 to 1-1/8 in, Curved Handle
2" X 24 METAL PIGTAIL HOSES-MFXP0222024 >
5/16" X 1-3/8" WOODRUFF KEY-MED1032 >
