Porter-Cable VERTICAL GRINDERS POR 7400
The Power-Stud anchor is a fully threaded, torque-controlled, wedge expansion anchor. It is available in threaded, rod hanger and tie-wire versions suitable for applications in solid concrete and grout-filled concrete masonry. The carbon steel threaded version is suitable for a variety of applications. The drill bit diameter necessary for proper installation is the same as the anchor diameter.
-
BrandDeWALT®
-
Manufacturer Part Number7400
-
CountryUSA
-
FinishZinc Plated
-
Tensile Strength1240 lb
-
Thread Length3/4 in
-
MaterialCarbon Steel
-
Thread Size1/4-20
-
Thread TypeUNC
-
Minimum Embedment Depth1-1/8 in
-
Head TypeThreaded Stud
-
Shear Strength1580 lb
-
Diameter1/4 in
-
Drill Size1/4 in
-
Overall Length1-3/4 in
- Fully threaded, heavy and medium duty all-purpose anchor
- Nominal drill bit diameter same as anchor diameter
- Length id stamped on each threaded anchor
- Anchors can be installed through the fixture, hole spotting not required
- Chamfered impact section prevents damage to threads
- Length of holes can be over-drilled or bottomless
- Clip design prevents spinning during installation
- Normal weight concrete, structural light weight concrete and grouted concrete masonry are applicable materials
- 1620 lb at 4000 psi and 6000 psi shear strength for concrete
- 1440 lb at 4000 psi, 1740 lb at 6000 psi tensile strength for normal-weight concrete
-
UNSPSC31162102
-
Standards/ApprovalsASTM E488|UL Listed
-
Specification Sheet
Recently Viewed
The Power-Stud anchor is a fully threaded, torque-controlled, wedge expansion anchor. It is available in threaded, rod hanger and tie-wire versions suitable for applications in solid concrete and grout-filled concrete masonry. The carbon steel threaded version is suitable for a variety of applications. The drill bit diameter necessary for proper installation is the same as the anchor diameter.
MCR Safety SS130 Stratos® Value Single Lens Safety Glasses, Duramass® Hard Coat, Clear Lens, Wrap Around Frame, Blue, Nylon Frame, Polycarbonate Lens, ANSI Z87+, CE EN 166, CAN/CSA Z94.3-07
SS1 Series Cost Efficient Design Wrap-Around Lens Design Built-In Side Shields Extendable length spatula temples The SS1 series features a one-piece polycarbonate lens and a stylish wrap-around design that offers the user a wide area of protection. Integral side shields offer protection from particles entering the eyewear from the sides. The SS1 provides an exceptionally wide angle of unrestricted vision, allowing you to safely assess your environment. The molded-in nose bridge comfortably fits a wide variety of faces. It features a stylish wrap-around design and a one-piece polycarbonate lens with integral side shields that filter out 99.9 percent of UV radiation. The lightweight frame provides added comfort and balance. If you are looking for the best safety glasses, look no further than MCR Safety! This product meets the ANSI/ISEA Z87.1-2025 standard.
8-MM X 1.00X30-MM HEX HEAD CAPSCREW-MET96108030F >
The United Abrasives/SAIT A24R Pipeline wheel is designed and manufactured to perform both cutting and light grinding on ferrous metals (steel, cast iron, etc.) eliminating the need for two separate wheels. Our unique Super-Lock™ Hub combines both a mechanical locking system and chemical bond providing one of the safest, vibration-free designs in the industry. Proudly manufactured in the USA.
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
Synchronous belt drives help reduce the problems of slippage, belt stretch, lubrication and metal to metal contact. They provide superior performance because power is transmitted by positive engagement of belt teeth rather than by friction, as in conventional belt drives.
