POWERS 3/8" X 5" S/STEEL CONCRETE ANCHORS PWR 7316
The Power-Stud® anchor, is a fully threaded, torque-controlled, wedge expansion anchor. It is available in a threaded version suitable for applications in solid concrete and grout-filled concrete masonry. The threaded version is produced in type 304 and type 316 stainless steel.
-
BrandDeWALT®
-
UPC753520731632
-
Manufacturer Part Number07316-PWR
-
CountryUSA
-
Tensile Strength4075 lb
-
Thread Length3-1/8 in
-
Material304 Stainless Steel
-
Thread Size3/8-16
-
Thread TypeUNC
-
Maximum Work Thickness3-3/8 in
-
Minimum Embedment Depth1-5/8 in
-
Shear Strength3760 lb
-
Diameter3/8 in
-
Drill Size3/8 in
-
Overall Length5 in
- Fully threaded, medium duty all-purpose anchor
- Anchors can be installed through the fixture for hole spotting not required
- Clip design prevents spinning during installation
- Length ID stamped on each threaded anchor
- Chamfered impact section prevents damage to threads
- Nominal drill bit diameter same as anchor diameter
| Competitor Name | Competitor Part Number |
|---|---|
| Fastenal | 2140564 |
-
UNSPSC31162102
-
Standards/ApprovalsASTM E488|FM Approved|Federal GSA Specifications|GSA: A-A-1923A|UL File No. EX1289
Recently Viewed
The Power-Stud® anchor, is a fully threaded, torque-controlled, wedge expansion anchor. It is available in a threaded version suitable for applications in solid concrete and grout-filled concrete masonry. The threaded version is produced in type 304 and type 316 stainless steel.
United Abrasives-SAIT 23207 Thin High Speed Cut-Off Wheel, 6 in Dia x 0.035 in THK, 1/2 in Center Hole, A60T Grit, Aluminum Oxide Abrasive
!e9s2fchbzbr1nzoug+g--60_57_100x100.jpg)
1-1/4" FLARE NOZZLE-PDTLV5551807 >
Gates® Power Transmission MegaCrimp™ 6G-6FJX90M G25 Medium Bent Tube Hydraulic Coupling, 3/8 in x 9/16-18 Nominal, Hose x 37 deg Female JIC Flare Swivel, Steel
It’s what’s inside the MegaCrimp coupling that makes it perform so well, the “C” insert. This “C” insert allows usage with different hose constructions and wall thicknesses. In addition, the C-insert ensures an even distribution of crimping forces to form a concentric seal. That simplifies your inventory requirements since one size can accommodate many different hose ODs, on both one- and two-wire braid hoses and select Xpiral hoses. An additional bonus: MegaCrimp couplings are fully qualified for SAE, EN, and ISO performance.
Smith Bearing® CR-7/8-XB Cylindrical Stud Type Needle Bearing Cam Follower, 7/8 in Dia x 1/2 in W Roller, 3/8 in Dia x 7/8 in L Stud, 52100 Steel Roller
Hex head stud type needle roller bearings are recommended where running loads and shock loads are moderate. Bearing capacity of the stud type series is limited by the moderately sized stud. Manufactured from high alloy bearing quality steel.
Browning 2-3/16"-ID 4-BOLT TRB FLANGE UNITS BRW FBE-920 X 2-3/16
Browning® E920 series mounted tapered roller bearings feature durable 1-piece non-expansion housings with Type E mounting dimensions and limited misalignment. The E920 series contains setscrew locking collars for easy installation. It also contains a contact face riding seal in order to provide a good balance between contaminant entry, grease retention and friction. Depending on your application requirements, these bearings are available in a wide variety of bore sizes and housing configurations.
