5/8" X 4" WEDGE BOLT ANCHORS PWR7262
The Screw-Bolt+™ anchor is a one-piece, heavy duty Screw Anchor with a finished hex head or flat head (countersunk). It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+™ is available as bright zinc-plated or mechanically galvanized plating. Suitable base materials include normal-weight concrete.
-
BrandDeWALT®
-
UPC075352305097
-
Manufacturer Part NumberPFM1411580
-
CountryUSA|Canada
-
FinishZinc Plated
-
Tensile Strength8885 lb
-
MaterialCarbon Steel
-
Maximum Work Thickness1-1/2 in
-
Minimum Embedment Depth2-1/2 in
-
TypeHeavy Duty
-
Head Drive TypeHex Washer
-
Head Size37/64 in H
-
Applicable MaterialsNormal Weight Concrete, Lightweight Concrete, Concrete Over Steel Deck, Grouted Concrete Masonry and Brick Masonry
-
Shear Strength17170 lb
-
Diameter5/8 in
-
Overall Length4 in
- Designed for standard ANSI tolerance drill bits
- Low installation torque in concrete and masonry
- Ratchet teeth on underside of hex washer head lock against the fixture
- Fully removable and reinstallable in same hole
- Diameter, length and identifying marking stamped on head of each anchor
- Patented thread design offers toughened threads for tapping high strength concrete
- Universal product for concrete and grouted/solid masonry
- Can be installed closer to a free-edge than traditional expansion anchors
- Fast installation with powered impact wrench, but can also be installed manually
- One-piece, finished head design
- Ultimate load capacity: 5735 lb tensile strength when embedded in 2500 psi, 6285 lb tensile strength when embedded in 3000 psi, 7255 lb tensile strength when embedded in 4000 psi, 8885 lb tensile strength when embedded in 6000/8000 psi compressive strength concrete
- Ultimate load capacity - 10615 lb shear strength when embedded in 2500 psi, 11630 lb shear strength when embedded in 3000 psi, 13425 lb shear strength when embedded in 4000 psi, 16445 lb shear strength when embedded in 6000 psi and 17170 lb shear strength when embedded in 8000 psi compressive strength concrete
- Allowable load capacity - 1435 lb tensile strength when embedded in 2500 psi, 1570 lb tensile strength when embedded in 3000 psi, 1815 lb tensile strength when embedded in 4000 psi and 2220 lb tensile strength when embedded in 6000/8000 psi compressive strength concrete
- Allowable load capacity - 2655 lb shear strength when embedded in 2500 psi, 2910 lb shear strength when embedded in 3000 psi, 3355 lb shear strength when embedded in 4000 psi, 4110 lb shear strength when embedded in 6000 psi and 4295 lb shear strength when embedded in 8000 psi compressive strength concrete
| Competitor Name | Competitor Part Number |
|---|---|
| Fastenal | 11572560 |
-
UNSPSC31162104
-
Package Description25/BX
-
Standards/Approvals2018 IBC/IRC|2015 IBC/IRC|2012 IBC/IRC|2009 IBC/IRC|ACI 355.2|ASTM E488|ACI 318|ANSI Specified|Evaluated and Qualified by an Accredited Independent Testing Laboratory|ICC-ES ESR-3889|ICC-ES ESR-4042|ICC-ES AC193
-
Specification Sheet
-
Catalog
Recently Viewed
The Screw-Bolt+™ anchor is a one-piece, heavy duty Screw Anchor with a finished hex head or flat head (countersunk). It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+™ is available as bright zinc-plated or mechanically galvanized plating. Suitable base materials include normal-weight concrete.
The Screw-Bolt+™ anchor is a one-piece, heavy duty Screw Anchor with a finished hex head or flat head (countersunk). It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+™ is available as bright zinc-plated or mechanically galvanized plating. Suitable base materials include normal-weight concrete.
The Power-Stud®+ SD1 Anchor is a fully threaded, torque controlled, wedge expansion Anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The Anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
The Power-Stud®+ SD1 Anchor is a fully threaded, torque controlled, wedge expansion Anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The Anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
The Power-Stud®+ SD1 Anchor is a fully threaded, torque controlled, wedge expansion Anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The Anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
The Power-Stud®+ SD1 Anchor is a fully threaded, torque controlled, wedge expansion Anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The Anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
