POWERS 5/8" X 3" WEDGE BOLT ANCHORS PWR 7260
The Screw-Bolt+™ anchor is a one piece, heavy duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+™ finish is available in bright zinc plated and mechanically galvanized. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick.
-
BrandDeWALT®
-
UPC075352305080
-
Manufacturer Part NumberPFM1411540
-
CountryUSA|Canada
-
FinishZinc Plated
-
Tensile Strength5735/6285/7255/8885 lb
-
MaterialSteel
-
Maximum Work Thickness1/2 in
-
Minimum Embedment Depth2-1/2 in
-
TypeHigh Performance
-
Head Drive TypeHex
-
Head Size15/16 in
-
Applicable MaterialsNormal Weight Concrete/Sand Lightweight Concrete/Concrete Over Steel Deck/Concrete Masonry/Solid Clay Brick
-
Shear Strength10615/11630/13425/16445/17170 lb
-
Diameter5/8 in
-
Drill Size5/8 in
-
Overall Length3 in
- Designed for standard ANSI tolerance drill bits
- Tough threads for tapping high strength concrete
- Can be installed closer to the edge than traditional expansion anchors
- Fast installation with powered impact wrench
- 1-piece, finished head design
- Patented thread design offers low installation torque
- Ratchet teeth on underside of hex washer head lock against the fixture
- Fully removable and re-installable in same hole
- Diameter, length and identifying marking stamped on head of each anchor
- 10615/11630/13425/16445/17170 lb at 2500/3000/4000/6000/8000 psi in normal weight concrete shear strength
- 5735/6285/7255/8885/8885 lb at 2500/3000/4000/6000/8000 psi in normal weight concrete tensile strength
| Competitor Name | Cross-Reference Number |
|---|---|
| Fastenal | 11572559 |
-
UNSPSC31162104
-
Standards/ApprovalsICC-ES ESR-3889|ICC-ES ESR-4042|2015 IBC|2015 IRC|2012 IBC|2012 IRC|2009 IBC|2009 IRC|ACI 355.2|ICC-ES AC193
-
Specification Sheet
-
Technical Bulletin
-
Instruction/Installation Manual
Recently Viewed
The Screw-Bolt+™ anchor is a one piece, heavy duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+™ finish is available in bright zinc plated and mechanically galvanized. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick.
1-QT HEAVY DUTY GLASS CLEANER-MISB00124 >
18" EX MARK BLADE-MED96344 >
Greenlee® ESM™ DM-210A Digital Multimeter, 60 mV to 1000 V AC/DC, 600 mA to 10 A, 600 Ohm to 60 MOhm, 600 nF to 300 uF Measuring, 600 Ohm, 6/60/600 kOhm, 6/60 MOhm, Backlit LCD Display
200A series was designed to provide all of the critical day to day features of handheld multimeters in a smaller, ergonomic design. Look to this series for CAT IV 300 VAC, CAT III 600 VAC and CAT II 1000 VAC applications. Backed by Greenlee® lifetime limited warranty, the 200A series multimeters offer the professional electrician superior value when compared to the competition.
KING GARDEN HOSE REELS-AME23884>
5/8 X 3/8" MIP FLARE CONNECTOR-JWH466533>
