POWERS 3/8 X 3 ZINC F/H PHIL TAPPER SCREW PWR 5852
3/8 X 3 ZINC Flat Head Philips TAPPER SCREW
-
BrandDeWALT® Anchors & Fasteners™
-
UPC075352319339
-
Manufacturer Part NumberPFM1411245
-
CountryUSA
-
FinishZinc Plated
-
Thread Length2 in
-
MaterialCarbon Steel
-
TypeHigh Performance
-
Head Drive TypeTorx®
-
Diameter3/8 in
-
Overall Length3 in
- Patented thread design offers toughened threads for tapping high strength concrete
- Low installation torque in concrete and masonry
- Universal product for concrete and grouted/solid masonry
- Ratchet teeth on underside of hex washer head lock against the fixture
- Can be installed closer to a free edge than traditional expansion anchors
- Fully removable and reinstallable in same hole
- Fast installation with powered impact wrench, but can also be installed manually
- Diameter, length and identifying marking stamped on head of each anchor
- One-piece, finished head design
-
UNSPSC31162101
-
Standards/ApprovalsInternational Code Council, Evaluation Service (ICC-ES), ESR-3889|International Code Council, Evaluation Service (ICC-ES), ESR-4042|2021 IBC/IRC, 2018 IBC/IRC, 2015 IBC/IRC, and 2012 IBC/IRC|ACI 355.2, ASTM E488 and ICC-ES AC193|Accredited Independent Testing Laboratory|Accredited Independent Testing Laboratory
-
Catalog
-
Owners/User Manual
-
Technical Bulletin
Recently Viewed
3/8 X 3 ZINC Flat Head Philips TAPPER SCREW
HCI Preferred Supplier 20090 90 deg Elbow, 1/4 in Nominal, Push-In x FNPTF End Style, Forged Brass
HCI Preferred Supplier 20090 90 deg Elbow, 1/4 in Nominal, Push-In x FNPTF End Style, Forged Brass
EPC 10030316 104-R Solder Reducing Male Adapter, 1/2 x 3/4 in, Solder x MNPT, Copper, Domestic
The production of copper fittings is environmentally safe, and the industry is the undisputed leader in recycling. Over half of the copper used in manufacturing EPC copper fittings is from recycled sources. These solder joint fittings are available in 1/8 to 8 in sizes.
1-3/8" BRASS TAGS--BX/100 THESE STURDY TAGS FEATURE 1 HOLE AND CAN BE STAMPED OR ENGRAVED.
-JWH576530 >
HCI Preferred Supplier 10024 Reducing Short Rod Nut, 1/2 x 3/8 in Nominal, SAE Flare Threaded UNF, Brass
HCI Preferred Supplier 10024 Reducing Short Rod Nut, 1/2 x 3/8 in Nominal, SAE Flare Threaded UNF, Brass
HCI Preferred Supplier 10459 45 deg Elbow, 3/4 in Nominal, SAE Male Flare x Male NPTF End Style, CA377 Brass
HCI Preferred Supplier 10459 45 deg Elbow, 3/4 in Nominal, SAE Male Flare x Male NPTF End Style, CA377 Brass
