1/4" X 3-3/4" TAPPER SCREW PWR2770
DeWALT® 2770SD Self-Threading Concrete Screw Anchor, 1/4 in Dia, 3-3/4 in OAL, Phillips®/Slotted Head Drive, Case Hardened Carbon Steel, 1-3/4 in D Min Embedment
-
BrandDeWALT®
-
UPC075352821153
-
Manufacturer Part Number2770SD
-
CountryUSA
-
FinishBlue Perma-Seal Coated
-
Tensile Strength2995 lb
-
MaterialCase Hardened Carbon Steel
-
Thread TypeHigh/Low
-
Minimum Embedment Depth1-3/4 in
-
TypeSelf-Threading
-
Head Drive TypePhillips®/Slotted
-
Head Size1/2 in OD x 3/16 in H
-
Applicable MaterialsConcrete/Lightweight Concrete/Grouted Concrete/Masonry/Hollow Concrete Masonry (CMU)/Solid Brick Masonry/Wood
-
SeriesTapper+®
-
Shear Strength1500 lb
-
Diameter1/4 in
-
Drill Size3/16 in
-
Overall Length3-3/4 in
- The Tapper+ fastening system is a complete family of screw anchors for light to medium duty applications in concrete, masonry block, brick, and wood base materials
- The Tapper+ is fast and easy to install and provides a neat, finished appearance
- The Tapper+ screw anchor is engineered with matched tolerance drill bits and installation tools designed to meet the needs of the user and also provide optimum performance
- The Tapper+ features a gimlet point for self-drilling into wood base materials without pre-drilling
- High-low thread design for greater stability and grip
- Does not exert expansion forces
- No hole spotting required
- Good corrosion protection with Perma-Seal coating
- Gimlet point
-
UNSPSC31161502
-
Package Description100/BX
-
Standards/ApprovalsICC-ES|UL Listing|FM Approvals|GSA/CID|ANSI/NSF 61|ACI 355.2|ICC-ES AC193
-
Catalog
Recently Viewed
DeWALT® 2770SD Self-Threading Concrete Screw Anchor, 1/4 in Dia, 3-3/4 in OAL, Phillips®/Slotted Head Drive, Case Hardened Carbon Steel, 1-3/4 in D Min Embedment
1/4" x 1-3/4" Flat Head Phillips Tapper Concrete Screw
DeWALT® Powers® 50120-PWR Standard Flat Head Drive Pin With 1 in Square Washer, 0.145 in Dia x 3 in L Shank, 0.3 in Dia Head
Drive pins with a 0.3 in Dia head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572/A992 structural steel. The fasteners are manufactured with a 0.145 in Dia shank in various lengths. Knurled shank designs are available for installations in thick steel base materials. A plastic flute is mounted on the pin shank to retain the drive pin in the barrel of the tool and provide guidance during the driving operation. The fasteners are also available in with a mechanically galvanized (MG) coating for use in treated lumber.
3/16" X 1/8" X 12" STEP KEYSTOCK-GLHSK011 >
DeWALT® 50382-PWR Head Pin, 0.145 in Dia Shank x 1 in L Shank, 0.3 in Dia Head
Threaded studs are available in 1/4-20 and 3/8-16 thread diameters with a variety of external thread and shank lengths for use in concrete, concrete over steel deck, concrete masonry walls and steel. They are used for applications where it may be desirable to remove the fixture or where shimming may be required or for suspending small diameter pipe (e.g. water lines, sprinkler systems). Knurled shank designs are available to increase performance in steel base materials. A plastic flute is mounted on the pin shank to retain the drive pin in the barrel of the tool providing guidance during the driving operation. Rod hangers and post nut hanger clips are available for suspending mechanical and electrical components from concrete and steel. They have an internally threaded clip or post nut designed to accept either 1/4-20 or 3/8-16 threaded rod. For the electrical trade, BX and EMT (electrical metallic tubing) conduit clips are provided in various sizes for attaching conduit to base materials where easy removal is not a requirement. Rebar basket clips are typically used in highway construction and paving applications to hold the support baskets for the reinforcing bars in place while the concrete is being poured.
The Power-Stud® Anchor, is a fully threaded, torque controlled, wedge expansion Anchor. It is available in a threaded version suitable for applications in solid concrete and grout filled concrete masonry. The threaded version is produced in Type 304 and Type 316 stainless steel.
