4.jpg)
511579 DO-IT-BEST/HWI PRODUCTS
1" UNISTRUT EMT PIPE CLAMPS-JWH511579>
| Cross-Reference Number |
|---|
| 511579 |
Recently Viewed
4_100x100.jpg)
1" UNISTRUT EMT PIPE CLAMPS-JWH511579>
JACKSON SAFETY® 14381 Model K Better Headgear, Black, Plastic, For Use With Universal Pin Face Shield, Ratchet Adjustment
JACKSON SAFETY® 14381 Model K Better Headgear, Black, Plastic, For Use With Universal Pin Face Shield, Ratchet Adjustment
IKO designs and manufactures a broad selection of Cam Followers to meet the diverse needs of applications including machine tools, industrial robots, electronic parts production and office automation equipment. A Cam Follower is a bearing that incorporates needle style rollers between a stud and a thick outer ring.
Gates® Power Transmission PowerGrip® GT®2 Twin Power® TP2000-8MGT-20 9232 Synchronous Belt, 250 Teeth, 8 mm Pitch, 2000 mm OAL, 20 mm W, Neoprene
PowerGrip™ GT™2 Twin Power™ Belts feature dual-sided teeth to provide equal load carrying capacity on either belt surface, enabling synchronization from both driving surfaces. These synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high flexibility. Gates Twin Power PowerGrip GT2 belts are designed to perform at high speeds and characterized by low-running noise, with a larger tooth profile for increased performance capacity.
Browning® 1296615 T65L Automatic Torque Limiter, 1-15/16 in Finished Bore, 6-1/2 in OD, 4800 in-lb (1-Spring)/8800 in-lb (2-Spring) Torque
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
FREUDENBERG Simmering® 75040594 B1 Oil Seal, 45 mm ID x 72 mm OD, 10 mm W, NBR Lip, 72 Durometer, Import, Transcom 15X28X5-SC
FREUDENBERG Simmering® 15X28X5SC-BX B1 Oil Seal, 45 mm ID x 72 mm OD, 10 mm W, NBR Lip, 72 Durometer, Import
