NIPPLES
1" ZINC OFFSET CONDUIT NIPPLES-APLRN100>
1/2" BUSHED CONDUIT NIPPLES-APLCNN100>
3/4" INSULATED BUSHED CONDUIT NIPPLE, 1/2" X 1/8"-APLCN75I >
3/4" -MALE PIPE THREAD BUSHED CONDUIT NIPPLE, 1/5' X 1/8"-APLCN75 >
1/2" INSULATED BUSHED NIPPLE, 7/16" X 1/8"-APLCN50I >
1/2" BUSHED CONDUIT NIPPLE, 7/16" X 1/8"-APLCN50 >
3" BUSHED CONDUIT NIPPLE, 1-3/16" X 3/8"-APLCN300 >
2-1/2" BUSHED CONDUIT NIPPLE, 1-1/8" X 3/8"-APLCN250 >
1-1/2" BUSHED CONDUIT NIPPLE, 5/8" 1/8"-APLCN150 >
1-1/4"-MPT BUSHED CONDUIT NIPPLES-APLCN125>
1" BUSHED CONDUIT NIPPLE, 5/8" X 1/8"-APLCN100 >
1/2" RIGID OFFSET ELECTRICAL NIPPLES-JWH502294>
Recently Viewed
ECCENTRIC LOCKING BEARING COLLAR-BCAC107 >
PIX A-41 IS A CLASSICAL V-BELT 43" OUTSIDE LENGTH, 1/2" TOP WIDTH, 5/16" THICKNESS, 1 RIB
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES
-PIXA41 >
PIX A-85 IS A CLASSICAL V-BELT 87" OUTSIDE LENGTH, 1/2" TOP WIDTH, 5/16" THICKNESS, 1 RIB
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES
-PIXA85 >
V-BELT - PIXC77>
PIX B-183 IS A CLASSICAL V-BELT, 185" OUTSIDE LENGTH, 5/8" TOP WIDTH, 13/32" THICKNESS, 1 RIB
PRECISE FIT, DURABLE POLYESTER CONSTRUCTION, VERSATILE APPLICATIONS, RESISTANT TO WEAR AND STRETCH, IMPROVES EQUIPMENT EFFICIENCY.
PIXB183>
DOUBLE-V V-BELT OUTSIDE CIRCUMFERENCE 89"-PIXC85 >
