Appleton® ETP™ 8468 Raised Square Box Cover, 4 in L x 4 in W x 3/4 in D, Switch Cover, Steel
Appleton® ETP™ 8468 Raised Square Box Cover, 4 in L x 4 in W x 3/4 in D, Switch Cover, Steel
-
BrandAppleton®
-
UPC687855776603
-
Manufacturer Part Number8468
-
CountryUSA
-
Capacity5.5 cu-in
-
FinishGalvanized
-
MaterialSteel
-
TypeRaised
-
Cover TypeSwitch
-
Width4 in
-
Number of Gangs1
-
ShapeSquared
-
Depth3/4 in
-
Length4 in
- Boxes with concentric or eccentric knockouts are suitable for bonding without any additional bonding means where used in circuits above or below 250 VAC
- Unless otherwise noted all concentric or eccentric knockouts are 1/2 to 3/4 in combinations
- Single and double gang metallic outlet and switch boxes are acceptable for use in two hr fire rated walls
- Groundskeeper raised ground feature on boss inside box provides one or two #10-32 tapped hole, allowing a 3/8 in long green ground screw to be threaded into box without contacting mounting surface
- Other boxes provided with flat ground tapped hole, except plenum boxes
- Single device
- Mud ring
-
Alternative Part Number8994826
-
UNSPSC39121304
-
IDEA Index ID8994826
-
Package DescriptionEACH
-
Standards/ApprovalsARRA Compliant|Buy American Act Compliant|UL 514A File No. E2527|NEMA OS-1
-
Specification Sheet
Recently Viewed
Appleton® ETP™ 8468 Raised Square Box Cover, 4 in L x 4 in W x 3/4 in D, Switch Cover, Steel
Appleton® ETP™ 8468 Raised Square Box Cover, 4 in L x 4 in W x 3/4 in D, Switch Cover, Steel
5-40" X 1/4" SOCKET SET SCREWS-NBS7190050025 >
1-15/16" INTERNAL RETAINING RING-ANR1300193 >
3/4" X 4" A-325 STRUCTURAL BOLT-NBS8990750400 >
BBI 496218 Fully Threaded Heavy Structural Bolt, 3/4-10, 1-3/4 in L Under Head, Medium Carbon Steel, Plain
BBI 496218 Fully Threaded Heavy Structural Bolt, 3/4-10, 1-3/4 in L Under Head, Medium Carbon Steel, Plain
This Louisville 6 foot non-conductive fiberglass shelf ladder has a load capacity of 300 lb, rated ANSI Type IA. This ladder is designed so that steps are at level when the ladder is set at 18 degrees. This shelf ladder is equipped with a rubber bumper that extends 6-inches down the side rails to protect the landing surface and to provide stability, heavy-duty gusset bracing, angled aluminum slip-resistant rubber feet, double-rivet step construction, and angled serrated aluminum steps. This ladder is ideal for getting to shelves with narrow aisles where standard ladders will not fit. The Louisville FH1006 shelf ladder meets or exceeds the safety standards set by ANSI, CSA, and OSHA.
