CUTLER HAMMER CH260 Plug-On Circuit Breaker
The Eaton CH260 Type CH, Two Pole, 60 Amps circuit Breakers are 3/4-inch per pole plug-on circuit breakers designed for Eaton's Type CH Load centers. They are 10 kAIC arc fault circuit interrupters rated for 120VAC or 240VAC applications. This product was made for the DiversiTech branded items.
-
BrandDiversitech
-
Manufacturer Part NumberCH260
-
CountryUSA
-
TypePlug-On
-
Voltage Rating120/240 V
-
Amperage Rating60 A
-
Number of Poles2
-
Interrupt Rating10 kAIC
-
Package DescriptionEACH
-
Standards/ApprovalsUL Listed
Recently Viewed
The Eaton CH260 Type CH, Two Pole, 60 Amps circuit Breakers are 3/4-inch per pole plug-on circuit breakers designed for Eaton's Type CH Load centers. They are 10 kAIC arc fault circuit interrupters rated for 120VAC or 240VAC applications. This product was made for the DiversiTech branded items.
The 6008 fiberglass 8 ft step ladder features a holstertop with the lock-in system that allows you to customize your ladder top. The system secures tools from falling while keeping them handy while working increasing productivity on the job. The tops also hold tools and have a sturdy paint can hanger on the back side. The external spreaders are pinch proof and the TRACTION-TRED® steps are slip resistant. This step ladder has a duty rating of 250 pounds and offers the EDGE® bracing for enhanced strength and increased protection against damage. Fiberglass rails are non-conductive for working near electricity.
Dodge® 004222 D-Flex Type JE Coupling Sleeve, 010 Coupling, 3-7/16 in L, 7-1/16 in OD, 3600 rpm Max, EPDM Rubber
Dodge® 004222 D-Flex Type JE Coupling Sleeve, 010 Coupling, 3-7/16 in L, 7-1/16 in OD, 3600 rpm Max, EPDM Rubber
6-PIECE INTERNAL & EXTERNAL CONVERTIBLE PLIER SET-ARS68079 >
3/4" X 2" PVC NIPPLE-JWH439948 >
MCR Safety 92735NXXL Cut Pro™ Cut-Resistant Gloves, 2XL, Nitrile Foam Coating, HyperMax™/Steel, Knit Wrist Cuff, Resists: Abrasion, Cut, Heat, Dirt, Grease and Puncture, ANSI Cut-Resistance Level: A9, ANSI Puncture-Resistance Level: 5
MCR Safety CutPro® 15-Gauge HyperMax® HPPE Shell Cut, Abrasion, and Puncture Resistant Nitrile Coated Palm and Fingertips Nitrile foam coated HyperMax® HPPE and steel shell offers superior cut protection The MCR Safety CutPro® Series offers various cut protection levels at a competitive price. The 92735N work gloves feature a 15-gauge plaited black HyperMax® HPPE and steel shell. The shell is coated on the palm and fingers with soft black nitrile. The 92735N scores a “top of the chart” A9 cut protection level. This glove also provides excellent puncture and abrasion resistance. The reinforced thumb crotch provides extended use in a high-stress area, and the nitrile coating gives the user excellent gripping power. The black color hides dirt and grease to keep the gloves looking good longer. If you are looking for the best cut-resistant gloves at an affordable price, look no further than MCR Safety’s CutPro® options.
