Drill Chucks
Jacobs® Hand-Tite® 30354 510-2H Keyless Professional Grade Drill Chuck, 0.04 to 0.375 in Capacity, 3/8-24 Threaded Mounting, Ball Bearing
Jacobs® Hand-Tite® 30354 510-2H Keyless Professional Grade Drill Chuck, 0.04 to 0.375 in Capacity, 3/8-24 Threaded Mounting, Ball Bearing
Jacobs® JCM31037 Hand-Tite® Drill Chuck, 0.062 to 0.5 in Capacity, 3/8-24 Threaded Mounting, Plain Bearing
Jacobs® Hand-Tite® 31037D 513-2M Keyless Drill Chuck, 0.062 to 0.5 in Capacity, 3/8-24 Mounting, Plain Bearing
Jacobs® JCM31038 Hand-Tite® Drill Chuck, 0.062 to 0.5 in Capacity, 1/2-20 Threaded Mounting, Plain Bearing
Jacobs® JCM31038 Hand-Tite® Drill Chuck, 0.062 to 0.5 in Capacity, 1/2-20 Threaded Mounting, Plain Bearing
Jacobs® JCM6289 Medium Duty Drill Chuck, 0.08 to 0.5 in Capacity, 5/8-16 Threaded Mounting, Plain Bearing, K32 Key
Jacobs® JCM6289 Medium Duty Drill Chuck, 0.08 to 0.5 in Capacity, 5/8-16 Threaded Mounting, Plain Bearing, K32 Key
Jacobs® JCM6309 Heavy Duty Drill Chuck, 0.18 to 0.8 in Capacity, 3JT Jacobs Taper Mounting, Plain Bearing, K4 Key
Jacobs® JCM6309 Heavy Duty Drill Chuck, 0.18 to 0.8 in Capacity, 3JT Jacobs Taper Mounting, Plain Bearing, K4 Key
Jacobs® Multi-Craft® 30247D Drill Chuck, 0.062 to 0.375 in Capacity, 3/8-24 Mounting, Plain Bearing, KG1 Key
The Multi-Craft® drill chuck is mounted as original equipment on more drills than any other chuck by both domestic and import drill manufacturers.
Jacobs® Multi-Craft® 30602 Drill Chuck, 0.078 to 0.5 in Capacity, Threaded Mounting, Plain Bearing, KK Key
The Multi-Craft® drill chuck is mounted as original equipment on more drills than any other chuck by both domestic and import drill manufacturers.
Milwaukee® 48-66-0817 Keyed Drill Chuck, 3/8 in Capacity, Threaded Mounting, 48-66-3350 Key
Milwaukee® 48-66-0817 Keyed Drill Chuck, 3/8 in Capacity, Threaded Mounting, 48-66-3350 Key
Milwaukee® 48-66-1360 Drill Chuck, 1/2 in Capacity
Milwaukee® 49-22-1560 Keyless Drill Chuck, 1/4 in Capacity, Integral Hex Shank Mounting, Plain Bearing, 48-66-3350
This replacement 1/4 in. chuck comes as standard equipment with the 6540-1 2.4 Volt single speed cordless screwdriver as well as 2-speed models (6547-1 and 6547-22). This chuck allows the same flexibility in drilling and driving capabilities as a driver drill or corded drill with a three jawed chuck. Includes chuck key.
This 1/2 in. grip lock keyless chuck withstands the vibration of the hammering action while keeping a firm hold on the bit. This chuck is offered as standard equipment on the Milwaukee hammer drill (model 0513-21). It can be used on any drill or hammer drill with a 1/2 in. capacity.
Recently Viewed
KNIT-WRIST NAP-IN HOT MILL GLOVES - GLV9128KW >
Schumacher® SE-70MA Deep Cycle Battery Charger, Fully Automatic Charge, 12/24 V, 10 A, 5.38 in W x 11 in D
Schumacher® SE-70MA Deep Cycle Battery Charger, Fully Automatic Charge, 12/24 V, 10 A, 5.38 in W x 11 in D
Carlon® products set the standard for non-metallic indoor and outdoor boxes, conduit bodies and fittings, enclosures and more. These premium products continue to supply the industry with innovative ideas, easier upgrades and a long, service-free product life.
Browning® 1022193 MVP® Type 15 Web Companion Sheave, 1-3/8 to 3-5/8 in Bushed Bore, 10.4 in OD, 5 Grooves, 10.4 in Dia Pitch, 7-7/8 in W Face
MVP® sheaves are a series of angular faced center flanges which are bolted to the fixed flange mounted on the barrel. They also contain another series of angular faced flanges which are bolted to the end flange and threaded locking collar. When the threaded locking collar is turned clockwise, it moves the angular flanges closer together increasing the pitch diameter. When the collar is moved counterclockwise, the flanges are moved apart, decreasing the pitch diameter. The pitch diameter is infinite. This means the collar adjustment can be turned and stopped at any time regardless of location between the minimum and the maximum setting. When the desired diameter is obtained, the locking collar is locked by tightening screws. In contrast VL, VP, and VM sheaves are limited by half- turn or 180 deg adjustment points.
Browning® 3063369 Multiple Sheave, 1/2 to 2-15/16 in QD® Bore, 18.7 in OD, 2 Grooves, 18.6 in Dia Pitch, 1-11/16 in W Face
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
Browning® 1064690 Type D Solid Multiple Sheave, 1/2 to 1-5/8 in QD® Bore, 3.35 in OD, 3 Grooves, 3.3 in Dia Pitch, 1-1/2 in W Face
Browning® offers an extensive multi-groove sheave offering. This includes Browning® Split-Taper® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time our exclusive B5V® sheaves have a patented design that offers 5V horsepower in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
