MORSE C/Tool 7/16"-20 SAE 4-FLUTE BOTTOM TAPS MCT 32635
MORSE® 32635 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 7/16-20 Thread, H3 Thread Limit, Bottoming Chamfer, 4 Flutes, Bright, HSS
-
BrandMORSE®
-
UPC686125326357
-
Manufacturer Part Number32635
-
CountryUSA
-
Finish/CoatingBright
-
Thread Length1-7/16 in
-
MaterialHSS
-
Thread LimitH3
-
Thread Size7/16-20
-
Thread StandardGround/UNF
-
Chamfer TypeBottoming
-
Measurement SystemImperial
-
TypeGeneral Purpose
-
Series2046
-
Number of Flutes4
-
Cutting DirectionRight Hand
-
Overall Length3-5/32 in
- Straight flute hand taps are used for hand tapping and machine tapping in through holes or blind holes in a wide variety of materials
-
UNSPSC23241615
-
Package Description1/PK
-
Standards/ApprovalsISO 9001:2008
Recently Viewed
MORSE® 32635 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 7/16-20 Thread, H3 Thread Limit, Bottoming Chamfer, 4 Flutes, Bright, HSS
Apex® AN-05 Socket Head Power Drive Bit, 5/32 in Hex Point, 3-1/2 in OAL, Steel
Apex® AN-05 Socket Head Power Drive Bit, 5/32 in Hex Point, 3-1/2 in OAL, Steel
SIZE 13" RUBBER CHEST WADER-JWH709088 >
MORSE® 13115 1333 General Purpose Jobber Length Drill Bit, 8.4 mm Drill - Metric, 0.3307 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
BBI 455386 Partially Threaded Cap Screw, 9/16-12, 3 in L Under Head, 8 Grade, Alloy Steel, Zinc Yellow Bake CR+6
BBI 455386 Partially Threaded Cap Screw, 9/16-12, 3 in L Under Head, 8 Grade, Alloy Steel, Zinc Yellow Bake CR+6
JACKSON SAFETY® 14426 Replacement Ratchet Suspension, 6-Point Suspension Points, For Use With Sentry III® Safety Helmets, HDPE, ANSI Z89.1
6-point ratchet suspension replacement parts are compatible with Jackson Safety* Sentry III hard hats, giving them extra longevity. These safety hats help provide on the job protection your workers. The hats are intended to reduce the force of impact that could result from a blow to the top of the head and the low profile, silhouette styled safety hats meet ANSI Z89.1 - 2009 requirements for impact (as well as Class C, G and E). The ratchet suspension system will fit head sizes 6.5 to 8 in and Sentry III hats have accessory slots for attaching additional compatible personal protective equipment. When you need to protect yourself and your team, trust Jackson Safety* Sentry III hard hats as your first line of defense against potential head hazards.
