P-1826-MR LESTER BROSSARD
18" X 26" ACRYLIC CONVEX MIRRORS-LLBP1826MR>
Recently Viewed
18" X 26" ACRYLIC CONVEX MIRRORS-LLBP1826MR>
Milwaukee® 48-20-4057 2-Cutter Rotary Hammer Drill Bit, 9/16 in Drill Bit, 3/4 in Spline Shank, 18 in D Cutting, Carbide Cutting Edge, 23 in OAL
Milwaukee®'s Spline 2-cutter rotary hammer drill bits are used for drilling intro brick, block, and concrete.
McGill® 0003230000 MI Series Narrow Machined Separable Inner Ring With Oil Hole and Annular Groove, 2 in ID x 2.4989 in OD, 1.51 in OAW, For Use With GUIDEROL® GR 40 N, CAGEROL® MR 40 N Bearing, Chrome Steel
Precision ground inner ring provides a hardened raceway for the rollers when used with an unhardened shaft. The ring contains an oil hole and annular groove for relubrication of the bearing and can be used with both CAGEROL® and GUIDEROL® bearings or can be utilized as a bushing in plain bearing applications.
Milwaukee® 49-57-1189 Tang Drive Annular Cutter, 1-3/16 in Dia Cutter, 1 in D Cutting, Uncoated, Quick-Change Shank
Drill holes up to 3X faster and enjoy fast change-outs with the Milwaukee® 1-3/16 in. quick change tang drive Steel Hawg® cutter. This long-lasting cutter features Carbide teeth and an alternating cutting pattern to cut up to a 1 in. hole depth in steel, stainless steel, cast iron or aluminum. It leaves a ream-like finish without pre punching or pilot holes. The Steel Hawg cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0012 or 49-57-0013 on Milwaukee's 4292-1 or 4297-1 magnetic drill press or arbor 49-57-0032 on Milwaukee's 4262-1 mag press.
1-7/16" 6-PT STRIKING WRENCH
36" CURVED SCREWDRIVER PRY BAR - MAY40138>
