MORSE® 33625 2068 General Purpose Straight Flute Hand Tap, Right Hand Cutting, #10-24 Thread, H3 Thread Limit, Tapered Chamfer, 4 Flutes, Bright, HSS
MORSE® 33625 2068 General Purpose Straight Flute Hand Tap, Right Hand Cutting, #10-24 Thread, H3 Thread Limit, Tapered Chamfer, 4 Flutes, Bright, HSS
-
BrandMORSE®
-
UPC686125336257
-
Manufacturer Part Number33625
-
CountryUSA
-
Finish/CoatingBright
-
Thread Length7/8 in
-
MaterialHSS
-
Thread LimitH3
-
Thread Size#10-24
-
Thread StandardGround/UNC
-
Chamfer TypeTapered
-
Measurement SystemImperial
-
TypeGeneral Purpose
-
Series2068
-
Number of Flutes4
-
Cutting DirectionRight Hand
-
Overall Length2-3/8 in
- Straight flute hand taps are used for hand tapping and machine tapping in through holes or blind holes in a wide variety of materials
| Competitor Name | Competitor Part Number |
|---|---|
| Berkshire eSupply | MT3733625 |
-
UNSPSC23241615
-
Package Description1/PK
-
Standards/ApprovalsISO 9001:2008
Recently Viewed
MORSE® 33625 2068 General Purpose Straight Flute Hand Tap, Right Hand Cutting, #10-24 Thread, H3 Thread Limit, Tapered Chamfer, 4 Flutes, Bright, HSS
MORSE® 33625 2068 General Purpose Straight Flute Hand Tap, Right Hand Cutting, #10-24 Thread, H3 Thread Limit, Tapered Chamfer, 4 Flutes, Bright, HSS
Crosby® 1016931 HR-125 Swivel Hoist Ring, 5000 lb Load, 180 deg Pivot, 360 deg Swivel, 0.69 in Bail, 3/4-10 UNC Thread
Crosby® 1016931 HR-125 Swivel Hoist Ring, 5000 lb Load, 180 deg Pivot, 360 deg Swivel, 0.69 in Bail, 3/4-10 UNC Thread
Drillco 300A116 Type C Heavy Duty Stub Length Screw Machine Length Drill, 1/4 in Drill - Fraction, 0.25 in Drill - Decimal Inch, HSS, Black Oxide
Screw Machine (Stub) length drills offering greater stability than longer drills. Heavy-duty design increases tool life and performance. 135° Split Point reduces walking at the point.
GP® 908MDS Deep Length Socket, 1/4 in, 8 mm Hex Socket, 6 Points
Hougen® Rotabroach® 3-12232 12000 Annular Cutter, 1 in Dia Cutter, 3 in D Cutting, M2 HSS, Bright, Weldon with 2-Flat Shank
Hougen "12000 Series" cutters were the original annular cutters invented over 35 years ago. With the most features of any annular cutter, "12000 Series" cutters provide the best performance in the largest variety of materials. Compared to traditional tooling (twist drills, etc.) "12000 Series" cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs. Hougen cutters maximize feed rates because up to 10 cutting edges distribute the cutting load evenly. "12000 Series" cutters convert a smaller area to chips, requiring less horsepower and thrust.
HCI Preferred Supplier 30207 Adapter, 1/2 in Nominal, POHB x MIP End Style, CA360 Brass
HCI Preferred Supplier 30207 Adapter, 1/2 in Nominal, POHB x MIP End Style, CA360 Brass
