MORSE C/Tool 1-1/4"-12 SAE/NF 6-FLUTE TAPER TAP MCT 32329
MORSE® 32329 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 1-1/4-12 Thread, H4 Thread Limit, Tapered Chamfer, 6 Flutes, Bright, HSS
-
BrandMORSE®
-
UPC686125323295
-
Manufacturer Part Number32329
-
CountryUSA
-
Finish/CoatingBright
-
Thread Length2-9/16 in
-
MaterialHSS
-
Thread LimitH4
-
Thread Size1-1/4-12
-
Thread StandardGround/UNF
-
Chamfer TypeTapered
-
Measurement SystemImperial
-
TypeGeneral Purpose
-
Series2046
-
Number of Flutes6
-
Cutting DirectionRight Hand
-
Overall Length5-3/4 in
- Straight flute hand taps are used for hand tapping and machine tapping in through holes or blind holes in a wide variety of materials
| Competitor Name | Competitor Part Number |
|---|---|
| Berkshire eSupply | MT3732329 |
-
UNSPSC23241615
-
Package Description1/PK
-
Standards/ApprovalsISO 9001:2008
Recently Viewed
MORSE® 32329 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 1-1/4-12 Thread, H4 Thread Limit, Tapered Chamfer, 6 Flutes, Bright, HSS
Koyo IR-2424 Inch Series Regular Width Inner Ring, 1-1/2 in ID x 1-3/4 in OD, 1.515 in OAW, For Use With Inch Series Drawn Cup Needle Roller Bearing, Steel
Where it becomes impractical to meet the shaft raceway design requirements (hardness, case depth, surface finish, etc.) outlined in the engineering section, standard inner rings for drawn cup bearings are available. Inner rings for drawn cup bearings are designed to be a loose transition fit on the shaft and should be clamped against a shoulder. If a tight transition fit must be used to keep the inner ring from rotating relative to the shaft, the inner ring OD as mounted, must not exceed the raceway diameters required by the drawn cup bearing for the particular application.
#6 X 2" Flat Head Phillips Sheet Metal Screw
SMALL RESPIRATORS-MOL8111 >
4.134" X 5.512" X .472" OIL SEALS-TCM105X140X12TC >
Wilton® WL9-11754 Angle Cradle Drill Press Vise, 7-1/4 in L 4-1/2 in H, 4 in Jaw Opening, Cast Iron
The cradle style drill press vise is designed for angled drilling and tapping applications. All boast hardened v-grooved jaws for clamping round objects vertically and horizontally. Backed by Wilton's lifetime warranty.
