MORSE C/Tool 3/4"-16 GH-3 4-FLUTE SHEAR TAPS MCT 34493
ShearTap™ offers exceptional value for high volume tapping. The geometry is optimized for long-chipping steels and stainless steels up to a hardness of 35Rc. Made with premium high speed steel with an enhanced flute design, the ShearTap™ offer great chip management, cutting edge strength and wear resistance, resulting in a high quality threads.
-
BrandShearTap™
-
UPC686125344931
-
Manufacturer Part Number34493
-
CountryUSA
-
Finish/CoatingBlack Steam Oxide
-
Thread Length0.82 in
-
MaterialHSS
-
Thread LimitH3
-
Material ApplicationSteels and Stainless Steels
-
Thread Size3/4-16
-
Thread StandardUNF
-
Chamfer TypeSemi-Bottoming
-
Class of FitH3
-
Measurement SystemImperial
-
TypeOversized
-
Series2091
-
Number of Flutes4
-
Cutting DirectionRight Hand
-
Overall Length4-1/4 in
- Steam oxide over nitride resists chip welding, increases lubricity and helps to retain cutting fluid
- CNC reduced neck design
- The spiral flutes draw the chips out of the hole
- Semi-bottoming style (2-3 thread chamfer) allows threading close to the bottom of blind holes but cuts more efficiently than standard bottoming taps due to a slightly longer chamfer which distributes the cutting load over a greater number of teeth
-
UNSPSC23241615
-
Package Description1/PK
-
Standards/ApprovalsISO 9001:2008
Recently Viewed
ShearTap™ offers exceptional value for high volume tapping. The geometry is optimized for long-chipping steels and stainless steels up to a hardness of 35Rc. Made with premium high speed steel with an enhanced flute design, the ShearTap™ offer great chip management, cutting edge strength and wear resistance, resulting in a high quality threads.
Whether you select 2-sided PVC dots or single sided, you will increase the grip and abrasion-resistance. The 9658 series features 7-ga cotton polyester shell with PVC dots on one side of the glove for added grip and abrasion.
DOUBLE SHIELDED BALL BEARING WITH SNAP RING-GUL62122ZNR >
Gates® Power Transmission PowerGrip® HTD® 159-3M-15 Synchronous Belt, 15 mm W, 159 mm OAL, 3 mm Pitch, 53 Teeth, Neoprene
PowerGrip™ HTD belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts. 3M and 5M belts are suitable for domestic appliances, office machines, electric hand tools and for applications in the processing and chemical industry. 8M, 14M and 20M belts are used in high-performance drives in the machine tool, paper and textile industries where durability and low maintenance are required.
4" GUTTER DOWNSPOUT ADAPTERS-JWH453269>
T-45-1/2" -DRIVE TORX DRIVER SOCKET -ARS12884 >
