Gates® Power Transmission PowerGrip® HTD® 159-3M-15 Synchronous Belt, 15 mm W, 159 mm OAL, 3 mm Pitch, 53 Teeth, Neoprene
PowerGrip™ HTD belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts. 3M and 5M belts are suitable for domestic appliances, office machines, electric hand tools and for applications in the processing and chemical industry. 8M, 14M and 20M belts are used in high-performance drives in the machine tool, paper and textile industries where durability and low maintenance are required.
-
BrandGates® Power Transmission
-
UPC72053610130
-
Manufacturer Part Number159-3M-15
-
CountryUSA|Canada
-
Pitch3 mm
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Tooth ProfileCurved
-
Reinforced MaterialFiberglass
-
Width15 mm
-
Series9293
-
Number of Teeth53
-
Overall Length159 mm
- Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
- Nylon tooth facing provides a durable wear surface for long service life
- Eliminates lubrication and re-tensioning to reduce maintenance and labor required on drives
- Neoprene body provides protection against grime, grease, oil and moisture
- Thirty percent increase in horsepower ratings, as compared to traditional timing belts
-
Alternative Part Number92930389
-
UNSPSC26111811
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission PowerGrip® HTD® 159-3M-15 Synchronous Belt, 15 mm W, 159 mm OAL, 3 mm Pitch, 53 Teeth, Neoprene
PowerGrip™ HTD belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts. 3M and 5M belts are suitable for domestic appliances, office machines, electric hand tools and for applications in the processing and chemical industry. 8M, 14M and 20M belts are used in high-performance drives in the machine tool, paper and textile industries where durability and low maintenance are required.
TCM23302VH>
The 5000® Series of bearings is similar in construction to the 400® Series bearing except it has a flange on the outer ring to locate the bearing when pressed into a tube or housing, thus eliminating the need for an external mounting device. The bearings are designed for moderate loads and speeds where running accuracy and noise level requirements do not warrant the more expensive precision ground bearings. This series of bearings feature a full ball complement without a retainer. The rings are case hardened and the soft steel band on the outer ring of the unitized assembly allows the bearing to be pressed into a housing without the necessity of close housing tolerances. The bearings are supplied pregreased as a standard. The bearings are designed for use in applications with speeds not exceeding 1200 rpm.
HCI Preferred Supplier 28145 Long Pipe Nipple, 1/4 in Nominal, 2 in L, Brass, NPTF End Style
HCI Preferred Supplier 28145 Long Pipe Nipple, 1/4 in Nominal, 2 in L, Brass, NPTF End Style
Carlon® E940N Non-Metallic Standard Conduit Coupling, 4 in, For Use With SCH 40 and SCH 80 Conduit, PVC
Carlon® products set the standard for non-metallic indoor and outdoor boxes, conduit bodies and fittings, enclosures and more. These premium products continue to supply the industry with innovative ideas, easier upgrades and a long, service free product life.
TRIMACO'S SUPERTUFF PAINTER'S MITT KEEPS HANDS CLEAN AND DRY WHEN PAINTING HARD TO REACH AREAS. OFFERING PROFESSIONAL QUALITY, IT IS GREAT FOR USE IN TOUGH SPOTS TO SAVE YOU TIME AND FRUSTRATION. YOU CAN EASILY CREATE TEXTURES AND ARTISTIC EFFECTS DURING FAUX FINISHING PROJECTS WHEN USING THIS MITT.
-JWH773344 >
