Drillco 24A116C6 2400 General Purpose Pulley Tap, 1/4-20 Thread
Pulley taps are used for tapping the hubs of pulleys for oil caps or set screws. The long shank is also ideal for reaching holes inaccessible with standard length taps. The thread length is the same length as a standard tap.
-
BrandDrillco
-
UPC045996895124
-
Manufacturer Part Number24A116C6
-
CountryUSA|Canada
-
Finish/CoatingUncoated
-
MaterialHSS
-
Thread Size1/4-20
-
Thread StandardUNC
-
Measurement SystemImperial
-
TypeGeneral Purpose
-
Series2400
-
Cutting DirectionRight Hand
-
Overall Length6 in
-
Tap Drill Size#7
- Available in plug geometry
- Bright finish for added lubricity
- 6 in long shank is used to thread hard to reach areas
- Square shank for use with standard sized tap wrenches
- 6 in long shank is used to thread hard to reach areas
-
UNSPSC27112806
-
Package Description1/PK
-
SDS
-
Catalog
Recently Viewed
Pulley taps are used for tapping the hubs of pulleys for oil caps or set screws. The long shank is also ideal for reaching holes inaccessible with standard length taps. The thread length is the same length as a standard tap.
Crescent® CAVBXR-5 Bolt Biter™ Impact Nut Extractor Set, 1/4, 5/16, 3/8, 7/16, 1/2 in Extractor, 1/4 in Shank
The Crescent APEX line of power tool accessories enhances durability, extends life and improves tool fit, while also making tools easier to identify on the jobsite. Pulling from 85+ years in assembly manufacturing, Crescent APEX is committed to providing high quality solutions with durable dependability.
XXL JACKET WITH LEATHER SLEEVE - RIIF930C/BSXXL>
Greenlee® 645-1-1/8 Quick-Change Hole Cutter, 1-1/8 in Dia, 8 ga D Cutting, Tungsten Carbide Tip Cutting Edge, 3/8 in Arbor
Greenlee® 645-1-1/8 Quick-Change Hole Cutter, 1-1/8 in Dia, 8 ga D Cutting, Tungsten Carbide Tip Cutting Edge, 3/8 in Arbor
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
Browning® 1123561 Single Strand Minimum Bore Type B Roller Chain Sprocket With Hardened Teeth, 1 in Dia Bore, 4.33 in OD, #80 Chain, 12 Teeth, Steel
Browning®Type B minimum bore sprockets are offered in single, double and triple strands. Offerings include 25 to 200 pitch range. Minimum bore sprockets are available in bore ranges from 1/4 to 8-3/8 in.
