United Abrasives SAIT 09558 6 x .014 x 5/8,1/2 x 1-3/16 Crimped Steel Bench Wire Wheels NARROW Face Width
• Dense, compact crimped carbon steel wire brush face
• May be stacked to achieve wider work face
• For general scale removal, cleaning and surface preparation
• Standard 2″ arbor, with adaptor to listed arbor
• Includes bushing pairs to adapt to variety of arbors
Recently Viewed
United Abrasives SAIT 09558 6 x .014 x 5/8,1/2 x 1-3/16 Crimped Steel Bench Wire Wheels NARROW Face Width
• Dense, compact crimped carbon steel wire brush face
• May be stacked to achieve wider work face
• For general scale removal, cleaning and surface preparation
• Standard 2″ arbor, with adaptor to listed arbor
• Includes bushing pairs to adapt to variety of arbors
1" -ID JAW COUPLING HALVES
Browning® 1296441 T45L Automatic Torque Limiter, 1-1/8 in Finished Bore, 4-1/2 in OD, 2800 in-lb (1-Spring)/4900 in-lb (2-Spring) Torque
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
3/4" TON LEVER HOIST WITH 10' LIFTING CHAIN, ALL STEEL CONSTRUCTION, TOTALLY ENCLOSED BRAKE MECHANISM-HRHLB00810 >
1.5 TON LEVER HOIST WITH 10' LIFTING CHAIN, ALL STEEL CONSTRUCTION, TOTALLY ENCLOSED BRAKE MECHANISM-HRHLB01510 >
1/4" -28" 45-DEGREE GREASE FITTING-FTGGZ45428 >
