MORSE C/Tool 1"-8-TPI 4-FLUTE B/P/T TAP SETS MCT 32721
MORSE® 32721 2046 Straight Flute Hand Tap Set, Right Hand Cutting, Bottoming/Plug/Taper Chamfer, H4 Thread Limit
-
BrandMORSE®
-
UPC686125327217
-
Manufacturer Part Number32721
-
CountryUSA
-
Finish/CoatingBright
-
Thread Length2-1/2 in
-
MaterialHSS
-
Thread LimitH4
-
Thread StandardGround/UNC
-
ChamferBottoming/Plug/Taper
-
Measurement SystemImperial
-
TypeStraight Flute
-
Series2046
-
Number of Flutes4
-
Cutting DirectionRight Hand
-
Number of Pieces3
-
Size#1-8
-
Overall Length5-1/8 in
- Straight flute hand taps are used for hand tapping and machine tapping in through holes or blind holes in a wide variety of materials
| Competitor Name | Competitor Part Number |
|---|---|
| Berkshire eSupply | MT3732721 |
-
UNSPSC23241615
-
Package Description1/PK
-
Standards/ApprovalsISO 9001:2008
-
Catalog
Recently Viewed
MORSE® 32721 2046 Straight Flute Hand Tap Set, Right Hand Cutting, Bottoming/Plug/Taper Chamfer, H4 Thread Limit
Milwaukee® M12™ 48-20-7464 2-Cutter Single Tip Rotary Hammer Drill Bit, 7/16 in Drill Bit, 25/64 in SDS-Plus Shank, 10 in D Cutting, Carbide Cutting Edge, 12-1/2 in OAL
Milwaukee® M/2™ 2-cutter SDS Plus rotary hammer drill bits are the most durable 2-cutter bits with up to 20% more holes per charge in cordless rotary hammers. The enhanced rebar guards provide increased durability in hard aggregate and rebar. Breaker point pulverize the material more effectively resulting in faster drilling speeds. The variable flute allows for maximum debris extraction leading to up 20% more holes per charge in cordless rotary hammer while making it a very durable bit in corded and cordless rotary hammers. Additionally, M/2™ 2-cutter features a centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements, and a reinforced flute for durability and minimized vibration. The increased life and efficiency of the M/2™ 2-cutter drill bit line provides the ideal solution in general concrete for cordless and corded rotary hammer users.
S-2140-1-1/2 CROSBY 1-1/2" 30-T BOLT ANCHOR SHACKLES
Working Load Limit (WLL): 30 metric tons (60,000 lbs) with a built-in safety design factor. Stock Number: 1021129 (identifying the specific Crosby self-colored/painted finish model). Material: Forged alloy steel body with a quenched and tempered alloy pin. Pin Diameter: 1.63 inches (41.4 mm), consisting of a secure bolt, nut, and cotter pin configuration. Throat Measurements: Provides a 2.38-inch throat width (between ears) and a 5.75-inch throat depth. Finish: Self-colored / Painted Black (Note: Its counterpart, the G-2140, represents the hot-dip galvanized finish version). Temperature Rating: Certified for reliable use in extreme conditions ranging from
OIL SEALS-TYPE J-FLANGE SEALS-IMS12685>
7/8" X 2" SAE GR-8 Hex Head Capscrew
RIDGID® 36895 00-R Hand Threader Die Head, 3/4 in Nominal, NPT Thread, Right Thread, Alloy Steel Die, For Use With Ridgid® 00-R Manual Pipe Threaders
RIDGID® 36895 00-R Hand Threader Die Head, 3/4 in Nominal, NPT Thread, Right Thread, Alloy Steel Die, For Use With Ridgid® 00-R Manual Pipe Threaders

