MORSE C/Tool 1/2"-13 USS NC B/T/P TAP SETS MCT 32709
MORSE® 32709 2046 Straight Flute Hand Tap Set, Right Hand Cutting, Bottoming/Plug/Taper Chamfer, H3 Thread Limit
-
BrandMORSE®
-
UPC686125327095
-
Manufacturer Part Number32709
-
CountryUSA
-
Finish/CoatingBright
-
Thread Length1-21/32 in
-
MaterialHSS
-
Thread LimitH3
-
Thread StandardGround/UNC
-
ChamferBottoming/Plug/Taper
-
Measurement SystemImperial
-
TypeStraight Flute
-
Series2046
-
Number of Flutes4
-
Cutting DirectionRight Hand
-
Number of Pieces3
-
Size1/2-13
-
Overall Length3-3/8 in
- Straight flute hand taps are used for hand tapping and machine tapping in through holes or blind holes in a wide variety of materials
| Competitor Name | Competitor Part Number |
|---|---|
| Berkshire eSupply | MT3732709 |
-
UNSPSC23241615
-
Package Description1/PK
-
Standards/ApprovalsISO 9001:2008
-
Catalog
Recently Viewed
MORSE® 32709 2046 Straight Flute Hand Tap Set, Right Hand Cutting, Bottoming/Plug/Taper Chamfer, H3 Thread Limit
3/32" X 36" BARE BRAZING ROD--PK/6-FOR48302>
Gates® Power Transmission PowerGrip® GT®2 Twin Power® TP2000-8MGT-30 9232 Synchronous Belt, 250 Teeth, 8 mm Pitch, 2000 mm OAL, 30 mm W, Neoprene
PowerGrip™ GT™2 Twin Power™ Belts feature dual-sided teeth to provide equal load carrying capacity on either belt surface, enabling synchronization from both driving surfaces. These synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high flexibility. Gates Twin Power PowerGrip GT2 belts are designed to perform at high speeds and characterized by low-running noise, with a larger tooth profile for increased performance capacity.
Browning 28-TOOTH #40-1-CHAIN SPROCKETS BRW H-4028 X 1-1/8
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
MORSE® 31572 2195M Adjustable Round Split Threading Die, M14x2 Thread, 1/2 in THK, 1-1/2 in OD Die, HSS
THE BASIC E-CLIP PROVIDES RELATIVELY LARGE SHOULDER HEIGHT FOR A SMALL SHAFT DIAMETER. ONLY GROOVE SIZE IS CRITICAL WITH THIS TYPE OF CIRCLIP, THE SHAFT DIAMETER CAN BE VARIED WIDE
