Round Dies
Drillco 31E140DC 3100E Adjustable Round Split Die, M14x2 Thread, 1-1/2 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E140CC 3100E Adjustable Round Split Die, M14x1.5 Thread, 1-1/2 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E120DC 3100E Adjustable Round Split Die, M12x1.75 Thread, 1-1/2 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E120CC 3100E Adjustable Round Split Die, M12x1.5 Thread, 1-1/2 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E120BC 3100E Adjustable Round Split Die, M12x1.25 Thread, 1-1/2 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E110BB 3100E Adjustable Round Split Die, M11x1.5 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E100DC 3100E Adjustable Round Split Die, M10x1.5 Thread, 1-1/2 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E100DB 3100E Adjustable Round Split Die, M10x1.5 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E100CB 3100E Adjustable Round Split Die, M10x1.25 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E090BB 3100E Adjustable Round Split Die, M9x1.25 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E080CB 3100E Adjustable Round Split Die, M8x1.25 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E060BB 3100E Adjustable Round Split Die, M6x0.75 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E050BB 3100E Adjustable Round Split Die, M5x0.8 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E045BB 3100E Adjustable Round Split Die, M4.5x0.75 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E040BB 3100E Adjustable Round Split Die, M4x0.7 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E040AB 3100E Adjustable Round Split Die, M4x0.5 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E035BB 3100E Adjustable Round Split Die, M3.5x0.6 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E030AB 3100E Adjustable Round Split Die, M3.0x0.5 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E025AB 3100E Adjustable Round Split Die, M2.5x0.45 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 30E124CC 3000E Adjustable Round Split Die, 3/8-16 UNC Thread, 1-1/2 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 30E120CC 3000E Adjustable Round Split Die, 5/16-18 UNC Thread, 1-1/2 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Recently Viewed
19 TOOTH DOUBLE SINGLE SPROCKETS FOR #50 CHAIN-BRWDS50A19 >
NOTCHED GRIP V-BELTS-BRW5VX1320>
5-VX-1400/07 PIX BELTS
7-GRV BANDED 5-VX-1400 V-BELTS-PIX5VX1400/07>
POWERATED FHP V-BELT >(4-L-360)-GAT6836 >
3-VX-1060/10 PIX BELTS
10-GROOVE BANDED 3-VX-1060 V-BELT - PIX3VX1060/10>
PIX 3VX560/05 OEM EQUIVALENT COGGED WEDGE BANDED V-BELT, 5 RIBS, 3/8" X 56" OC
MADE OF RUBBER CUSHION; POLYESTER CABLE CORD AS REINFORCEMENT AND RUBBER IMPREGNATED WOVEN COTTON-POLYESTER FABRIC. USED WHERE HORSE POWER CAPACITY OR OUTPUT IS NEEDED, WHEN SINGLE OR MULTIPLE DRIVES ARE IMPRACTICAL DUE TO LIMITED SPACE. USED WHERE BELT VIBRATION OR BELT WHIP CAUSES UNSATISFACTORY RESULTS WHERE MULTIPLE CONVENTIONAL V-BELTS ARE INSTALLED
-PIX3VX560/05>
