Straight Router Bits
Dremel® 654 Router, 1/8 in Dia Cutting, 1.42 in OAL
Freud® 28-100 Panel Pilot Router Bit, 3/8 in Dia Cutting, 3 in OAL, 1 in D Cutting, 1/4 in Dia Shank, Carbide
Freud® panel pilot bits will outlast high-speed steel bits many times before sharpening. The drill through point allows self-starting and the pilot acts as a guide for template work.
Porter-Cable® 43064 Combination Panel Pilot Router Bit, 1/2 in Dia Cutting, 3-11/16 in OAL, 1-1/4 in D Cutting, 1/2 in Dia Shank, Carbide
Porter-Cable® 43321 Double Flush Router Bit, 1/2 in Dia Cutting, 1/4 in Dia Shank
Porter-Cable® 43717 Router Bit, 1/4 in Dia Cutting, 2-3/64 in OAL, 3/4 in D Cutting, 1/4 in Dia Shank, Carbide
Porter-Cable® 43191 Mortising Router Bit, 15/64 in Dia Cutting, 1/4 in Dia Shank, Carbide
Porter-Cable® 43182 Flush Bevel Laminate Flush Trim Bit, 1/2 in Dia Cutting, 4-31/64 in OAL, 1-17/32 in D Cutting, 1/2 in Dia Shank
Porter-Cable® 43193 Porter-Cable® Router Bit, 23/32 in Dia Cutting, 2-1/4 in OAL, 1 in D Cutting, 1/4 in Dia Shank, Carbide
Porter-Cable® 43195 Router Bit, 23/32 in Dia Cutting, 2-3/4 in OAL, 1 in D Cutting, 1/2 in Dia Shank, Carbide
Porter-Cable® 43183 Flush Bevel Laminate Flush Trim Bit, 1/2 in Dia Cutting, 4-5/64 in OAL, 1-1/4 in D Cutting, 1/2 in Dia Shank, Carbide
Porter-Cable® 43336 Router Bit, 3/4 in Dia Cutting, 1/4 in Dia Shank, Carbide
Porter-Cable® 43194 Router Bit, 31/64 in Dia Cutting, 2-11/16 in OAL, 1 in D Cutting, 1/2 in Dia Shank
Porter-Cable® 43115 Pocket Cutter Bit, 21/64 in, 5/16 in Dia Cutting, 2-13/16 in OAL, 3/4 in D Cutting, 1/4 in Dia Shank, Carbide
Porter-Cable® 43303 Router Bit, 5/16 in Dia Cutting, 1/4 in Dia Shank
Porter-Cable® 43440 Router Bit, 5/8 in Dia Cutting, 2-5/16 in OAL, 9/16 in D Cutting, 1/4 in Dia Shank, Carbide
Porter-Cable® 43330 Plunge Cutting Router Bit, 5/8 in Dia Cutting, 1/4 in Dia Shank
Porter-Cable® 44858 Flush Bevel Combination Router Bit, 7/16 in Dia Cutting, 1-3/4 in OAL, 1/4 in D Cutting, 1/4 in Dia Shank, Carbide
Porter-Cable® 43268 3-Wing Flush Trim Router Bit, 3/8 in Dia Cutting, 1/4 in Dia Shank, Carbide
Porter-Cable® 43451 Pattern Cutting Laminate Trim Bit, 5/16 in Dia Cutting, 2-21/32 in OAL, 3/4 in D Cutting, 1/4 in Dia Shank, Carbide
Porter-Cable® 43450 Porter-Cable® Router Bit, 5/16 in Dia Cutting, 1/4 in Dia Shank
Porter-Cable® 43910 Router Bit, 1/2 in Dia Cutting, 2-51/64 in OAL, 1/2 in Dia Shank, Carbide
Porter-Cable® 43692 Tru-Match Router Bit, 1/2 in Dia Cutting, 1/2 in Dia Shank, Carbide
Recently Viewed
Crescent Wiss® has taken the Aviation Snip to the next level with the advanced MetalMaster® Aviation Snips. The precision-cast molybdenum blades have CNC-ground serrations which allow for more uniform serrations that provide a cleaner cut every time. They feature extended pivot bolt life due to the superior free-float design. The spring-action design allows for fast, effortless feed. The all-new latch design provides ergonomic single-handed operation for left or right handed users. New extended non-slip handle grips give users better control while cutting. The new generation of Crescent Wiss MetalMaster® will cut over 8 miles of steel and feature up to 10 times longer cut life than traditional Aviation Snips. They are available in left/straight cut, right/straight cut, and straight cut.
Sloan® 3305620 EL-1500 Sensor Replacement Kit, For Use With Regal® Urinal Flushometer, Domestic
1/4" TO 3/4" COBALT UNIBITS-IRW10233-CB>
7/16" HEX POWER DRIVE BIT HEX SIZE 1/2"-APXAN16 >
7/16" HEX POWER DRIVE BIT HEX SIZE 5/16"-APXAN10 >
Greenlee® 30236 Knockout Punch Kit Case, Plastic
