Drillco 437E108 4375E Imperial Chucking Reamer, 1/8 in Dia x 3-1/2 in OAL, Straight Shank, Spiral Flute
Straight Shank Chucking Reamers are designed for general purpose reaming in machines such as drill presses, turret lathes, and screw machines. They have shorter and deeper flutes than hand reamers. For machine reaming.
-
BrandDrillco
-
UPC045997097770
-
Manufacturer Part Number437E108
-
CountryUSA|Canada
-
FinishBright/Black
-
MaterialHSS
-
Flute Length7/8 in
-
Flute TypeSpiral
-
TypeImperial
-
Series4375E
-
Cutting DirectionRight Hand
-
Shank TypeStraight
-
Diameter1/8 in
-
Body Diameter1/8 in
-
Overall Length3-1/2 in
- Spiral flutes for faster chip ejection and cutting operation
- Regularly pointed with a 45 deg chamfer
- Spiral flutes for faster chip ejection and cutting operation
-
UNSPSC23241645
-
Package Description1/PK
-
SDS
-
Catalog
Recently Viewed
Drillco 437E108 4375E Imperial Chucking Reamer, 1/8 in Dia x 3-1/2 in OAL, Straight Shank, Spiral Flute
Straight Shank Chucking Reamers are designed for general purpose reaming in machines such as drill presses, turret lathes, and screw machines. They have shorter and deeper flutes than hand reamers. For machine reaming.
All position welding, low hydrogen rod for general purpose AC applications requiring low penetration, can also be used on DC+. Designed for welding head enable steels and projects involving hard to weld steels including thick sections and restrained joints with cracking issues. Not recommended for use with low open circuit voltage (OCV) power sources. Excellent for tack welds and out of position welding
1/4" X 36" Square Plain Keystock
Browning® 1296417 T45L Automatic Torque Limiter, 3/4 in Finished Bore, 4-1/2 in OD, 2800 in-lb (1-Spring)/4900 in-lb (2-Spring) Torque
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
BBI 451187 Partially Threaded Cap Screw, 1-8, 9 in L Under Head, 8 Grade, Alloy Steel, Plain
BBI 451187 Partially Threaded Cap Screw, 1-8, 9 in L Under Head, 8 Grade, Alloy Steel, Plain
RIDGID® 38705 Pawl Pin, For Use With: Model 00-R Pipe and Conduit Drop-Head Threaders, Model 206 No-Hub® Soil Pipe Cutter and Model 2-S Reamer
RIDGID® 38705 Pawl Pin, For Use With: Model 00-R Pipe and Conduit Drop-Head Threaders, Model 206 No-Hub® Soil Pipe Cutter and Model 2-S Reamer
