MORSE® 21570 1655D Dowel Pin Chucking Reamer, 0.3745 in Dia x 7 in OAL, 0.3105 in Dia Straight Shank, Straight Flute
MORSE® 21570 1655D Dowel Pin Chucking Reamer, 0.3745 in Dia x 7 in OAL, 0.3105 in Dia Straight Shank, Straight Flute
-
BrandMORSE®
-
UPC686125215705
-
Manufacturer Part Number21570
-
CountryUSA
-
FinishBright
-
MaterialHSS
-
Flute Length1-3/4 in
-
Flute TypeStraight
-
TypeDowel Pin
-
Series1655D
-
Shank Diameter0.3105 in
-
Number of Flutes6
-
Cutting DirectionRight Hand
-
Shank TypeStraight
-
Diameter0.3745 in
-
Overall Length7 in
- 45 deg chamfer for reaming of most materials
- Dowel Pin reamers are produced with increased back taper and a minus diameter tolerance
- Chucking reamers are produced with minimal back taper and a plus diameter tolerance
-
UNSPSC23241645
-
Package Description1/PK
-
Standards/ApprovalsISO 9001:2008
Recently Viewed
MORSE® 21570 1655D Dowel Pin Chucking Reamer, 0.3745 in Dia x 7 in OAL, 0.3105 in Dia Straight Shank, Straight Flute
MORSE® 21570 1655D Dowel Pin Chucking Reamer, 0.3745 in Dia x 7 in OAL, 0.3105 in Dia Straight Shank, Straight Flute
OIL SEALS-.394" X 1.575" X .276"-CHI10X40X7HMS4R>
1-1/2" PVC TRAP ADAPTER-JWH432106 >
Dixon® NG60 Flange Gasket, Neoprene, 6 in Nominal, 8-3/4 in OD x 1/16 in THK, Class 150 Class, Domestic
Dixon® NG60 Flange Gasket, Neoprene, 6 in Nominal, 8-3/4 in OD x 1/16 in THK, Class 150 Class, Domestic
Starrett® 387-18 Beveled Straight Edge, Imperial Measuring System, Graduations 32nds of an Inch, Steel, Regular Steel
The Starrett 387 Series Steel Straight Edge with Bevel and Graduated End is precision ground and nicely finished to rigid Starrett standards. It is unexcelled for drawing or scribing straight lines and checking surfaces for straightness. Its thickness and design permits it to retain its shape and accuracy, but still be portable and easy to handle. 18" (450mm).
5/8" X 6" JAW/JAW TURNBUCKLE - SWC5/8X6JJTB>
