Browning® 3750676 Taper Bore Bushing, 2-7/8 in Dia Bore, 4-1/4 in Dia Barrel, 3 in OAL
Browning® 3750676 Taper Bore Bushing, 2-7/8 in Dia Bore, 4-1/4 in Dia Barrel, 3 in OAL
-
BrandBrowning®
-
UPC662289618231
-
Manufacturer Part Number3750676
-
CountryUSA
-
Taper1-1/2 in/ft
-
Torque Rating24000 in-lb
-
Screw Size5/8 in Dia x 1-1/4 in L
-
Number of Bolt Holes2
-
Barrel Diameter4-1/4 in
-
Keyway Size3/4 x 3/8 in
-
Bolt Circle Diameter4 in
-
Bore Diameter2-7/8 in
-
Overall Length3 in
-
Suitable For Use WithGearbelt® Sprockets, HPT® and HPT Chain™ Synchronous Belt Drives
- Mounts flush in products - No protruding flanges to interfere with the drive
-
Alternative Part Number3030X 2 7/8
-
UNSPSC31163205
-
Package DescriptionEACH
-
Standards/ApprovalsABMA/AGMA/AIST/AWEA/CEMA/GEAPS/MPTA/NSSGA/PTDA Standards
-
Warranty1 Year
-
Catalog
-
Instruction/Installation Manual
-
Warranty Information
Recently Viewed
Browning® 3750676 Taper Bore Bushing, 2-7/8 in Dia Bore, 4-1/4 in Dia Barrel, 3 in OAL
Browning® 3750676 Taper Bore Bushing, 2-7/8 in Dia Bore, 4-1/4 in Dia Barrel, 3 in OAL
1-1/2" SCHEDULE 80 SLIP-ON FLANGES-FIT11/2XHBWFSLIP >
Jones Stephens™ C02050 Enduro Closet Bolt, 2-1/2 in OAL, Plastic
Browning® 1296474 T45L Automatic Torque Limiter, 1-3/8 in Finished Bore, 4-1/2 in OD, 2800 in-lb (1-Spring)/4900 in-lb (2-Spring) Torque
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
Midland Industries 80-003 Dry Standard Pressure Gauge, 0 to 60 psi, 1/4 in Connection, 2 in Dial
TR-5-Y SEALMASTER Female Rod End Bearing, Three-Piece Greaseable with Y Stud Carbon Steel Race, Item# 1410508000. 0.3125" Bore, 335lbs Axial Load. RH Threads, Y-Stud, No Zerk Fitting, Not Relubricatable, a Regal Rexnord Brand Product.
Sealmaster TR 5Y Female Rod End Bearing, Three-Piece Greaseable with Y Stud Carbon Steel Race, Item# 1410508000. 0.3125" Bore, 335lbs Axial Load. RH Threads, Y-Stud, No Zerk Fitting, Not Relubricatable, a Regal Rexnord Brand Product
