MORSE® 29151 1655H Chucking Reamer, 0.119 in Dia x 3-1/2 in OAL, 0.112 in Dia Straight Shank, Straight Flute
MORSE® 29151 1655H Chucking Reamer, 0.119 in Dia x 3-1/2 in OAL, 0.112 in Dia Straight Shank, Straight Flute
-
BrandMORSE®
-
UPC686125291518
-
Manufacturer Part Number29151
-
CountryUSA
-
FinishBright
-
MaterialHSS
-
Flute Length7/8 in
-
Flute TypeStraight
-
Series1655H
-
Shank Diameter0.112 in
-
Number of Flutes4
-
Cutting DirectionRight Hand
-
Shank TypeStraight
-
Diameter0.119 in
-
Overall Length3-1/2 in
- 45 deg chamfer for reaming most materials
-
UNSPSC23241645
-
Package Description1/PK
-
Standards/ApprovalsISO 9001:2008
Recently Viewed
MORSE® 29151 1655H Chucking Reamer, 0.119 in Dia x 3-1/2 in OAL, 0.112 in Dia Straight Shank, Straight Flute
MORSE® 29151 1655H Chucking Reamer, 0.119 in Dia x 3-1/2 in OAL, 0.112 in Dia Straight Shank, Straight Flute
1/2" DIAMETERX2-1/2" SHOULDER BOLT-HOL08084 >
4" CPVC SCH-80 PLASTIC PIPE (FT)-NIBCPVCC80400 >
INS-SC-103 Dodge® 123338 206 Normal Duty Set Screw Ball Bearing, 1-3/8 in Dia Bore, 2.4409 in OD, 1.52 in W, 7332 lb Dynamic/4475 lb Static Load
INS-SC-103 Dodge® 123338 206 Normal Duty Set Screw Ball Bearing, 1-3/8 in Dia Bore, 2.4409 in OD, 1.52 in W, 7332 lb Dynamic/4475 lb Static Load
Dichtomatik N70109 O-Ring, 109 Dash Number, 0.299 in ID x 0.505 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Browning® 1229491 Finished Bore Straight Tooth Miter Gear With Setscrew, 10 Diametral Pitch, 20 deg Pressure Angle, 20 Teeth, 2 in Dia Pitch, 0.44 in W Face, 5/8 to 7/8 in Dia Bore, Unhardened Steel
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
