Champion SA80-1 Car/Maintenance Reamer, 1 in Dia x 7-3/16 in OAL, 1/2 in Dia Straight Shank, Left Helical Flute
Champion SA80-1 Car/Maintenance Reamer, 1 in Dia x 7-3/16 in OAL, 1/2 in Dia Straight Shank, Left Hand Helix Flute
-
BrandChampion
-
UPC846035062398
-
Manufacturer Part NumberSA80-1
-
CountryUSA
-
FinishBlack Oxide/Bright
-
Point Size0.62 in
-
MaterialHSS
-
Flute Length4-3/4 in
-
Flute TypeLeft Helical
-
Applicable MaterialsStainless Steel and Tough Alloy
-
SeriesSA80
-
Shank Diameter1/2 in
-
Number of Flutes5
-
Cutting DirectionRight Hand
-
Shank TypeStraight
-
Diameter1 in
-
Overall Length7-3/16 in
- Collar stop
- Enlarge and align existing holes
- Effortlessly fits into small holes
-
UNSPSC23241611
-
Catalog
Recently Viewed
Champion SA80-1 Car/Maintenance Reamer, 1 in Dia x 7-3/16 in OAL, 1/2 in Dia Straight Shank, Left Helical Flute
Champion SA80-1 Car/Maintenance Reamer, 1 in Dia x 7-3/16 in OAL, 1/2 in Dia Straight Shank, Left Hand Helix Flute
16-TOOTH #60-1 CHAIN SPROCKETS IDC 60-B-16-F1-1/2
16 TOOTH SPROCKETS FOR #60 CHAIN
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
M12" X 40 SOCKET HEAD CAP SCREWS-HOL76372 >
PLASTIC HANDLE WHITE NYLON FENDER WASH BRUSH - MAG73N >
15-TOOTH #40-1 CHAIN SPROCKETS IDC 40-B-15-F-3/4
15 TOOTH SPROCKETS FOR #40 CHAIN
