Milwaukee® 49-59-2163 Annular Cutter, 1-5/8 in Dia Cutter, 2 in D Cutting, HSS, Oxide Treated, Weldon Shank
Milwaukee high speed steel annular cutters offer a thin-wall construction with an advanced tooth geometry that cuts and cleans while drilling, leading to faster holes and longer life. The cutters displace less material for the same size hole as the competition, giving you fast, burr-free holes in anything from sheet metal to thick plate steel. All Milwaukee high speed steel annular cutters have a 3/4 in. Weldon shank for use with most small magnetic drill presses and large magnetic drill presses with the correct arbor.
-
BrandMilwaukee®
-
UPC045242208043
-
Manufacturer Part Number49-59-2163
-
CountryUSA|Canada
-
FinishOxide Treated
-
MaterialHSS
-
Applicable MaterialsAluminum, Brass, Copper, Mild Iron, Steel and Wood
-
Cutter Diameter1-5/8 in
-
Cutting Depth2 in
-
Shank Size3/4 in
-
Cutting Edge MaterialHSS
-
Shank TypeWeldon
- 15% Faster cutting - Thinner wall construction displaces less material
- Dual alternating tooth geometry - Double bevel and flat teeth cut more aggressively and boost chip ejection
- Long lasting - Proprietary steel with three hardness zones reduces breakage and extends bit life
- Multipurpose 3/4 Weldon shank - Works with most magnetic drill presses and large magnetic presses with the right sized arbor
- Versatile design - One centering and ejecting pin size works for all 2 depth cutters
| Competitor Name | Cross-Reference Number |
|---|---|
| MSC | 04418372 |
| Grainger | 21R653 |
-
Alternative Part Number8599574
-
UNSPSC27112826
-
IDEA Index ID8599574
-
Package DescriptionEACH
-
Standards/ApprovalsARRA Compliant|Buy American Act Compliant
-
WarrantyNo Warranty
Recently Viewed
Milwaukee® 49-59-2163 Annular Cutter, 1-5/8 in Dia Cutter, 2 in D Cutting, HSS, Oxide Treated, Weldon Shank
Milwaukee high speed steel annular cutters offer a thin-wall construction with an advanced tooth geometry that cuts and cleans while drilling, leading to faster holes and longer life. The cutters displace less material for the same size hole as the competition, giving you fast, burr-free holes in anything from sheet metal to thick plate steel. All Milwaukee high speed steel annular cutters have a 3/4 in. Weldon shank for use with most small magnetic drill presses and large magnetic drill presses with the correct arbor.
Diversitech WG840739HT High Temperature Condenser Fan Motor, 3/4 hp, 460 V AC, 60 Hz, 48 Frame, 1075 rpm Speed
These motors install with all standard 48 frame mounting brackets. They are a quiet operator and electrically reversible. There is an Automatic Thermal Overload Protector and they have class B insulation. They have 30 in leads and 60 Hz with low power consumption. The motor has a standard 48 frame motor casing size and has drain holes with plugs on both end plates. There is a continuous air over on this motor and a 70 deg C Ambient Design with Extended Studs.
The B&K Schedule 80 PVC Threaded Union is used to join lengths of pipe together. Can be used with either Schedule 40 or Schedule 80. Its female-threaded connections allow for convenient dis-assembly of piping without having to make cuts.
United Abrasives-SAIT 84204 Sanding Sheet, 11 in L x 9 in W, 320 Grit, Aluminum Oxide Abrasive, Paper Backing
Cuts up to 150 mm (5.91 in) and welds up to 9 mm (0.35 in) with proper tips. Cuts up to 5 mm (0.20 in) and welds 1.98 mm (5/64 in) right out of the box. Ideal for general maintenance medium-duty fusion welding, braze welding, brazing, hand cutting applications, HVAC and automotive repair. For use in light fabrication, in the shop, on the farm or ranch and at home. 250-series regulators. 100-series torch handle. 1350-series cutting attachment. 0-3-101 cutting tip. W-1-0 welding tip. 1/4 in (6.35 mm) x 12.5ft (3.81 m) twin welding hose with fittings. Built-in check valves and flashback arrestor. Accessories included: 50 mm (1.97 in) cup type shade #5 goggles, round single flint striker, 13-piece tip cleaner and plastic carry case.
MCR Safety stocks a variety of ANSI rated safety vests for your high visibility needs. With an assortment of styles and colors, you can choose a garment that ensures that you show up in a variety of complex backgrounds. It can be a matter of life or death, so be seen in MCR Safety's Hi-Vis apparel. The VCL2ML is an ANSI/ISEA Class 2 value safety vest made of fluorescent lime polyester mesh material. Mesh offers more breathability in warm environments. This vest features a hook & loop front closure, 2 inch silver reflective stripes, 2 outer and 1 inner pocket.
