Greenlee® Kwik Stepper® 36018G Multi-Hole Step Bit, 9.7 mm Dia Max Hole
K-45 is a hand held drain cleaning machine used to clean secondary drain lines (such as found in kitchens, bathrooms and utility rooms) from 3/4 in to 2-1/2 in diameter with the correct cable. Depending on the cable choice, the drum will hold up to 50 ft of cable. The K-45 is available with two feed styles, manual feed and AUTOFEED® (AF). Both have a slide action chuck for quick locking/releasing of the cable. The AUTOFEED allows the cable to be advanced and retrieved with the push of a lever. Helps keep hands and work area clean. The manual version requires that the cable be fed in and out of the drum by hand. The K-45 is a double insulated design equipped with a polarized plug. A FOR/REV switch controls drum and cable rotation and the variable speed ON/OFF switch provides control of the motor. The two piece twist-lock drum will not dent or corrode, and allows easy access to the inner drum. The inner drum allows quick cable change out, helps prevent cable flip over in the drum, and reduces the likelihood of drum leakage.
-
BrandGreenlee®
-
UPC783310360186
-
Manufacturer Part Number36018G
-
CountryUSA|Canada
-
Tool/KitKit
-
Voltage Rating115 VAC
-
Control TypeAutofeed®
-
Amperage Rating3.2 A
-
Speed0 to 600 rpm
-
Maximum Hole Diameter9.7 mm
-
TypeMulti-Hole
-
Applicable MaterialsAluminum, Brass, Copper, Laminates, Mild Steel, Plastic and Wood
-
Number of Flutes2
-
Cutting Depth3/8 in
-
Overall Length1-7/8 in
- Steam oxide finish runs cooler for longer life
- Unique split-tip design penetrates steel faster
- Manual version has a slide-action chuck for quick locking/releasing of cable (Not available in Europe)
- Lightweight, easy-to-use, no setup required
- Variable speed power unit rotates cable 0 to 600 rpm
- Two-piece twist lock canister with interchangeable inner drum - Makes cable change-out simple; easy to match the right cable for the job
- Inner drum prevents water leaks and greatly reduces cable flip-over inside the drum
- Drums won't rust or dent-ever
- Includes RIDGID® drain cleaning mitt and operator's manual
- Inner core cables: (Models C-1IC, C-6IC, C-13IC, C-2IC, C-23IC) vinyl-wrapped inner core to prevent core from rusting to spring - enhances cable life, Compression wound for strength, Resists kinking and negotiates tough bends and traps and provides good flexibility and cleaning power to the cable end
- 120 V 50/60 Hz double insulated single-phase universal motor
- 5/16 in x 25 ft inner core cable with inner drum
- For 3/4 to 2-1/2 in drain lines
| Competitor Name | Competitor Part Number |
|---|---|
| Ferguson | RID36018 |
-
UNSPSC23241640
-
Includes901 Bit Extension
-
Package DescriptionEACH
-
Standards/ApprovalsARRA Compliant
-
Warranty1 Year Limited
-
Alternative Part Number36018|8430079
-
IDEA Index ID8430079
-
Specification Sheet
Recently Viewed
K-45 is a hand held drain cleaning machine used to clean secondary drain lines (such as found in kitchens, bathrooms and utility rooms) from 3/4 in to 2-1/2 in diameter with the correct cable. Depending on the cable choice, the drum will hold up to 50 ft of cable. The K-45 is available with two feed styles, manual feed and AUTOFEED® (AF). Both have a slide action chuck for quick locking/releasing of the cable. The AUTOFEED allows the cable to be advanced and retrieved with the push of a lever. Helps keep hands and work area clean. The manual version requires that the cable be fed in and out of the drum by hand. The K-45 is a double insulated design equipped with a polarized plug. A FOR/REV switch controls drum and cable rotation and the variable speed ON/OFF switch provides control of the motor. The two piece twist-lock drum will not dent or corrode, and allows easy access to the inner drum. The inner drum allows quick cable change out, helps prevent cable flip over in the drum, and reduces the likelihood of drum leakage.
5/16" 6-PT SHORT FULL POLISH COMBINATION WRENCH-ARS25010 >
3/4" 6-PT FULL POLISH LONG COMBINATION WRENCH-ARS25324 >
Proto® TorquePlus™ J1218ES Double End Combination Wrench, 9/16 in Wrench, 12 Points, 15 deg Offset, 4-1/2 in OAL, Alloy Steel, Full Polished, ASME B107.100-2010
Proto® TorquePlus™ J1218ES Double End Combination Wrench, 9/16 in Wrench, 12 Points, 15 deg Offset, 4-1/2 in OAL, Alloy Steel, Full Polished, ASME B107.100-2010
Proto® TorquePlus™ J1258 Anti-Slip Design Combination Wrench, 1-13/16 in Wrench, 12 Points, 15 deg Offset, 25 in OAL, Alloy Steel, Satin, ASME B107.100, ANSI B107.6
Proto® TorquePlus™ J1258 Anti-Slip Design Combination Wrench, 1-13/16 in Wrench, 12 Points, 15 deg Offset, 25 in OAL, Alloy Steel, Satin, ASME B107.100, ANSI B107.6
Stanley® BW-1109M Combination Wrench, Metric, 9 mm, 6 Points, 15 deg Offset, 4-7/8 in OAL, Alloy Steel, Satin, ASME B107.100
Stanley® BW-1109M Combination Wrench, Metric, 9 mm, 6 Points, 15 deg Offset, 4-7/8 in OAL, Alloy Steel, Satin, ASME B107.100
