MORSE® 51096 5374 Standard Length Jobber Length Drill Bit, 15/64 in Drill - Fraction, 0.2344 in Drill - Decimal Inch, 118 deg Point, Solid Carbide, Bright
MORSE® 51096 5374 Standard Length Jobber Length Drill Bit, 15/64 in Drill - Fraction, 0.2344 in Drill - Decimal Inch, 118 deg Point, Solid Carbide, Bright
-
BrandMORSE®
-
UPC686125510961
-
Manufacturer Part Number51096
-
CountryUSA
-
FinishBright
-
Point Angle118 deg
-
Point TypeSplit
-
MaterialSolid Carbide
-
Through Coolant (Yes/No)No
-
Flute Length2 in
-
Flute TypeStandard
-
TypeStandard Length
-
Applicable MaterialsAluminum, Cast Iron, Non-Ferrous Alloy and Plastic
-
Series5374
-
Cutting Depth2 in
-
Shank Size15/64 in
-
Cutting DirectionRight Hand
-
Cutting Edge MaterialSolid Carbide
-
Shank TypeStraight
-
Drill Diameter Measurement SystemImperial
-
Drill Size - Decimal Inch0.2344 in
-
Drill Size - Fraction15/64 in
-
Overall Length3-1/4 in
- Solid carbide offers excellent hardness, wear resistance and heat resistance for higher cutting speeds and longer tool life
- High rigidity enhances hole accuracy and quality
-
UNSPSC23241605
-
Package Description1/PK
-
Standards/ApprovalsISO 9001:2008
-
Catalog
Recently Viewed
MORSE® 51096 5374 Standard Length Jobber Length Drill Bit, 15/64 in Drill - Fraction, 0.2344 in Drill - Decimal Inch, 118 deg Point, Solid Carbide, Bright
MORSE® 51096 5374 Standard Length Jobber Length Drill Bit, 15/64 in Drill - Fraction, 0.2344 in Drill - Decimal Inch, 118 deg Point, Solid Carbide, Bright
Campbell® 6506031 Replacement Cam/Pad Kit, For Use With 3 ton GX Clamps
Campbell® can trace its beginnings back to 1834, when one of the many companies that eventually became what is today the Campbell® brand began manufacturing harnesses for horses. Over the years, countless products were added, including wire rope and chain fittings, drop forged chain hardware, high quality tackle blocks, shackles, hooks and much more.
Proto® J49901/8XL Extra Long Socket Driver Bit, 3/8 in Drive, 1/8 in, 5 in L Bit
Proto® J49901/8XL Extra Long Socket Driver Bit, 3/8 in Drive, 1/8 in, 5 in L Bit
Gardner Bender LTG-400 Liquid Waterproof Seal Electrical Tape, Rubber, Green
This rubber based brush-on liquid tape forms a protective, waterproof, UV-resistant, dielectric seal around spliced electrical wire to protect against corrosion, shortages, electrical shock and vibration. The quick drying fluid cures in 24 hours and will not deterioriate or unravel like traditional tape. Resistant to chemicals, solvents, saltwater and other common fluids, to achieve connections that last for decades. To apply, shake well then use brush built into the cap to liberally brush the liquid over the splice/connection. Allow to dry for 5 minutes and then re-apply if a thicker application is needed. Ideal for both indoor and outdoor use and under extreme environments including automotive, marine, farm/ag and RV. 4 oz bottle temp range: -30 to 200 degrees F and -34 to 93 degrees C.
Porter-Cable® 43182 Flush Bevel Laminate Flush Trim Bit, 1/2 in Dia Cutting, 4-31/64 in OAL, 1-17/32 in D Cutting, 1/2 in Dia Shank
Porter-Cable® 43182 Flush Bevel Laminate Flush Trim Bit, 1/2 in Dia Cutting, 4-31/64 in OAL, 1-17/32 in D Cutting, 1/2 in Dia Shank
Proto® J74152 Socket Set, Imperial, 1/2 in Drive, 7 Pieces, Black Oxide
Proto® J74152 Socket Set, Imperial, 1/2 in Drive, 7 Pieces, Black Oxide
