Drillco 350E002 3500E Imperial Plain Combined Drill and Countersink, 5/64 in Drill - Fraction, 0.0781 in Drill - Decimal Inch, 60 deg Included Angle, 60 deg Point Angle, HSS, Uncoated
When metal parts are machined on centers, as in turning or cylindrical grinding, it is always necessary to drill and countersink the center holes to serve as seats or bearings in the machine centers.
-
BrandDrillco
-
UPC045996999198
-
Manufacturer Part Number350E002
-
CountryUSA|Canada
-
FinishUncoated
-
Point Angle60 deg
-
Point Diameter5/64 in
-
MaterialHSS
-
TypeImperial Plain
-
Series3500E
-
Shank Size3/16 in
-
Cutting DirectionRight Hand
-
Cutting Edge MaterialHSS
-
Included Angle60 deg
-
Drill Size - Decimal Inch0.0781 in
-
Drill Size - Fraction5/64 in
-
Body Diameter3/16 in
-
Overall Length1-7/8 in
- Plain type with single 60 chamfer
- Bright finish for added lubricity
- Double ended for twice the life
- Double ended for twice the life
-
UNSPSC20121600
-
Package Description1/PK
-
SDS
-
Catalog
Recently Viewed
Drillco 350E002 3500E Imperial Plain Combined Drill and Countersink, 5/64 in Drill - Fraction, 0.0781 in Drill - Decimal Inch, 60 deg Included Angle, 60 deg Point Angle, HSS, Uncoated
When metal parts are machined on centers, as in turning or cylindrical grinding, it is always necessary to drill and countersink the center holes to serve as seats or bearings in the machine centers.
B&K® 108-003 ProLine™ Sillcock, 1/2 in Nominal, FNPT End Style, Brass Body, Import
B&K® 108-003 ProLine™ Sillcock, 1/2 in Nominal, FNPT End Style, Brass Body, Import
Bevel and miter gearing is a form of gearing in which the tooth-bearing surfaces are the faces of the gears rather than the edges. In bevel and miter gearing, the gears are cone shaped. This allows the edges of the mating gears to mesh and transmit torque. The geometry of the mesh creates a 90 deg angle. As a result, this type of gearing is suitable for applications where a change of direction is required. Other designs exist to create other angles however 90 deg serves the majority of applications. In bevel and miter gearing the input and output shaft are intersecting. It is typical for bevel and miter gear reducers to have lower reduction ratios. For example, 5:1 and lower are typical and they are different than other types of gearing. Two types of bevel and miter gearing are typical. These are straight and spiral. As the name implies, the teeth of straight bevel gears are cut straight. This means that the teeth are oriented perpendicular to the outside edge of the gear. The teeth on spiral bevel gears are cut at an angle to the outside edge of the gear. This type of gearing is said to have "helical" teeth and the angle is called the "helix" angle. Bevel and miter gearing have proven reliable for many years. The use of this type of gearing extends across many industries. Some of these include food processing, woodworking, paper and textile.
3" X 1/16" X 1/4" CUTOFF WHEEL-PEACW0330T >
Hard Hat 7715 and 7778 should be used on new, bare steel, blasted steel or light rusted steel surfaces or properly prepared painted substrates alike barbecue grills, fire place equipment, space heaters etc. Provides heat resistance up to 750 deg C (1380 deg F) dry heat (short term peak resistance) in sheltered or interior environments.
Ultra QUS239YL Heavy Duty Stack and Hang Bin, 10-3/4 in L x 8-1/4 in W x 7 in H, 0.36 cu-ft, Yellow


