Dodge® 4600 D-Flex Finished Bore Flexible Type S Sleeve Coupling Flange, 09 Coupling, 1-3/4 in Dia Bore, 2.41 in L Through Bore, 4.13 in Dia Hub
Dodge® 4600 D-Flex Finished Bore Flexible Type S Sleeve Coupling Flange, 09 Coupling, 1-3/4 in Dia Bore, 2.41 in L Through Bore, 4.13 in Dia Hub
-
BrandDodge®
-
UPC782475871070
-
Manufacturer Part Number4600
-
CountryUSA
-
Maximum Speed3750 rpm
-
TypeFinished Bore Flexible Type S
-
Coupling Size09
-
SeriesD-Flex
-
Hub Diameter4.13 in
-
Hub Length3/4 in
-
Keyway Size3/8 x 3/16 in
-
Length Through Bore2.41 in
-
Bore Diameter1-3/4 in
- Rounded EPDM and neoprene element edges for full tooth engagement, even load distribution, reduced stress build up, and longer life
- Outside diameter concentric to bore for ease in alignment
- Interchangeable components makes installation quick and easy
- No lubrication assures trouble-free operation
-
UNSPSC31163001
-
Standards/ApprovalsAGMA 9002 Standard
-
Specification Sheet
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Dodge® 4600 D-Flex Finished Bore Flexible Type S Sleeve Coupling Flange, 09 Coupling, 1-3/4 in Dia Bore, 2.41 in L Through Bore, 4.13 in Dia Hub
Dodge® 4600 D-Flex Finished Bore Flexible Type S Sleeve Coupling Flange, 09 Coupling, 1-3/4 in Dia Bore, 2.41 in L Through Bore, 4.13 in Dia Hub
1HP,3PH,143-T,1725-RPM AC MOTOR-BLDVEM3546T>
Sealmaster® 702847 MP Series Medium Duty Pillow Block Ball Bearing Unit, 3-3/16 in Dia Bore, 9-11/16 to 12-9/16 in L Bolt Center-to-Center, 4 in Base to Bore Centerline, 15 in OAL x 8 in OAH
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
Gates® Power Transmission Micro-V® 320J4 Heavy Duty V-Belt, J Section, 3/32 in W Top, 32 in L Outside, 5/32 in THK, Chloroprene
Exclusive truncated (shortened) profile gives Gates® Micro-V® belts increased flexibility, reduced heat buildup and allows performance at higher speeds on smaller diameter sheaves.
Sealmaster® 705590 Expansion Standard Duty Straight Bore Ball Bearing Insert With Seal Flinger, 1-1/4 in Dia Bore, 3.14 in OD, 1-3/4 in W, 5782 lb Dynamic/3493 lb Static Load
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
13 TOOTH SPROCKETS FOR #80 CHAIN-BRWH8013X17/8 >
