T.B. Woods COUPLING INSERT TBW 6-HS
Our new Sure-Flex® Plus EPDM and neoprene sleeves are best-in-class for coupling performance and value. Their 4-way flexing action absorbs virtually all types of shock, misalignment and end float. With Sure-Flex® couplings, the need for lubrication and maintenance is eliminated.
-
BrandTB Wood's®
-
UPC698672660310
-
Manufacturer Part Number6HS
-
CountryUSA
-
Temperature Rating-65 to 250 deg F
-
MaterialHytrel
-
Maximum Speed6000 rpm
-
Torque Rating1800 in-lb
-
Type1-Piece Split Type HS
-
Coupling Size6
-
Inside Diameter5/8 to 1-7/8 in
-
Outside Diameter3-3/4 in
-
Length1-7/8 in
-
Suitable For Use WithSure-Flex® Plus S, C and SC Flange and Elastomeric Coupling
- They cannot be used with J or B flanges or as direct replacements for EPDM or neoprene sleeves
-
UNSPSC31163000
-
Standards/ApprovalsCE Certified|PROP65: This product contains lead, known to the State of California to cause cancer and birth defects or other reproductive harm.
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Our new Sure-Flex® Plus EPDM and neoprene sleeves are best-in-class for coupling performance and value. Their 4-way flexing action absorbs virtually all types of shock, misalignment and end float. With Sure-Flex® couplings, the need for lubrication and maintenance is eliminated.
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES. IN THE SAME MANNER THESE BELTS ARE ADVANTAGES WHERE REVERSE IDLERS HAVE TO BE USED BECAUSE OF SMALLER HEIGHTS.
PIXA110K>
300 LB TELESCOPING MULTILADDER -WERMT26 >
8" X 2" 1200# RIGID CASTERS-PJCMH820PH64R >
Dormer Pramet S2471/4: This is a 1/4-inch ball-nosed end mill featuring 4 flutes (4FL). It is constructed with an extra-long reach and is coated in Titanium Aluminum Nitride (TiAlN) for enhanced heat and wear resistance during high-speed machining. You can check availability or order specs directly through tool suppliers like Perry M
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
