TB Wood's® L10015/16 Straight L-Jaw Coupling Hub, L100 Coupling, 15/16 in Bore, 1.38 in, 2.53 mm Hub, Sintered Carbon Steel
TB Wood's® L10015/16 Straight L-Jaw Coupling Hub, L100 Coupling, 15/16 in Bore, 1.38 in, 2.53 mm Hub, Sintered Carbon Steel
-
BrandTB Wood's®
-
UPC698672110778
-
Manufacturer Part NumberL10015/16
-
CountryUSA
-
MaterialSintered Carbon Steel
-
Maximum Speed7000 rpm
-
Screw Size5/16-18 UNC-2B x 3/8 in L
-
Coupling SizeL100
-
Hub Diameter2.53 mm
-
Hub Length3-1/2 in
-
Keyway Size1/4 x 1/8 in
-
Length Through Bore1.38 in
-
Bore Diameter15/16 in
-
UNSPSC31163000
-
Standards/ApprovalsPROP65: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
TB Wood's® L10015/16 Straight L-Jaw Coupling Hub, L100 Coupling, 15/16 in Bore, 1.38 in, 2.53 mm Hub, Sintered Carbon Steel
TB Wood's® L10015/16 Straight L-Jaw Coupling Hub, L100 Coupling, 15/16 in Bore, 1.38 in, 2.53 mm Hub, Sintered Carbon Steel
HCI Preferred Supplier 36120 Ball Check Grease Fitting, 1/8-27 NPTF Thread, 0.84 in OAL, Steel
HCI Preferred Supplier 36120 Ball Check Grease Fitting, 1/8-27 NPTF Thread, 0.84 in OAL, Steel
Heritage™ Euro™ H2105 90 deg Metric Zerk Grease Fitting, M8x1 Thread, 18 mm OAL, 5.5 mm L Shank, Steel, Zinc Yellow
Heritage™ Euro™ H2105 90 deg Metric Zerk Grease Fitting, M8x1 Thread, 18 mm OAL, 5.5 mm L Shank, Steel, Zinc Yellow
Makita® A-96540 ImpactX™ Driver Bit, T10 Torx® Point, 1 in OAL, 1/4 in, S2 Steel
ImpactX™ is a line of impact-rated insert bits and fastening accessories built specifically for the demands of the professional contractor. Professionals require commercial duty bits and fastening accessories that can endure the force of high-volume screw driving applications with high torque impact drivers. Standard screwdriving bits are brittle and fit poorly into fasteners and in applications with high torque impact drivers this losing combo quickly leads to broken bits. ImpactX™ hits back with improved fitment and increased performance with high torque impact drivers. Precision machined (not forged) tips ensure full contact fit, while performance-optimized and heat-treated S2 steel provides more flex and more durability than standard, brittle bits.
Campbell® T4900824 Cold Shut, 1/2 in Trade, 3700 lb Load, Mild Steel, Zinc Plated
Campbell® can trace its beginnings back to 1834, when one of the many companies that eventually became what is today the Campbell® brand began manufacturing harnesses for horses. Over the years, countless products were added, including wire rope and chain fittings, drop forged chain hardware, high quality tackle blocks, shackles, hooks and much more.
HCI Preferred Supplier 36182 Ball Check Grease Fitting, M10x1 Thread, 21 mm OAL, Steel
HCI Preferred Supplier 36182 Ball Check Grease Fitting, M10x1 Thread, 21 mm OAL, Steel
