Browning 48" ALUMINUM ROLLER RAIL BRW VG-688-H-1.4-04
System Plast™ SpeedRoll™ VG-688H-1.4-04 Speedroll, 48 in OAL x 0.86 in OAW, 0.45 in Dia Wheel, 0.48 in Center to Center Roller Spacing
-
BrandSystem Plast™
-
UPC787405499980
-
Manufacturer Part NumberVG-688H-1.4-04
-
CountryUSA
-
Center to Center Roller Spacing0.48 in
-
Wheel Diameter0.45 in
-
Overall Length48 in
-
Overall Width0.86 in
- Ram extruded UHMW-PE
- Low friction characteristics of UHMW allow chains/belts and containers to move at high speed with minimum drag and noise as well as minimum container damage
- High wear resistance
-
UNSPSC24101702
-
Package DescriptionEACH
-
Standards/ApprovalsFDA Approved
-
WarrantyLimited
Recently Viewed
System Plast™ SpeedRoll™ VG-688H-1.4-04 Speedroll, 48 in OAL x 0.86 in OAW, 0.45 in Dia Wheel, 0.48 in Center to Center Roller Spacing
MOP OR BROOM HOLDER-JWH601432 >
2-GRV 5-V-BELT QUICK DISCONNECT SK-BUSH SHEAVES-IDC2/5V0750SK >
Browning® 1002906 TB Series Type 13 Arm Multiple Sheave, 1 to 2-5/8 in Split Taper Bore, 16.35 in OD, 5 Grooves, 15.8 in (A)/16.3 in (B) Dia Pitch, 4 in W Face
Browning® offers an extensive multi-groove sheave offering. This includes Browning® Split-Taper® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time our exclusive B5V® sheaves have a patented design that offers 5V horsepower in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
Browning® 1077239 Type SF Q-D® Bushing, 1-5/16 in Dia Bore, 3-1/8 in Dia Barrel, 4-5/8 in Dia Flange, 2 in OAL, Cast Iron
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
MORSE® 59783 5970 Premium Carbide Burr, Flame Head, 5/8 in Dia Head, 1-7/16 in L of Cut, 3-3/16 in OAL, Double Cut
