Wilton® WL9-13402 Cam Action Drill Press Vise, 18-15/16 in L 6-5/16 in H, 6-3/16 in Jaw Opening, 600 to 1200 lb Capacity, Cast Iron
With the Wilton Cam Action Drill Press, a simple push or pull on the center bar knob sets the jaw in position
-
BrandWilton®
-
UPC019907134022
-
Manufacturer Part NumberWL9-13402
-
CountryUSA
-
Capacity600 to 1200 lb
-
MaterialCast Iron
-
Throat Depth1-13/16 in
-
TypeCam Action
-
Base TypeStationary
-
Jaw Opening6-3/16 in
-
Jaw Width6 in
-
Overall Height6-5/16 in
-
Overall Length18-15/16 in
- Simple push or pull on the center bar knob sets the jaw in position
- Easy press locking lever cams the jaw ahead 3/32 in, exerting a holding pressure that is adjustable from 400 to 1100 lb
- Base is designed for clear through drilling applications
- Unique top locking lever can be raised or lowered to tighten or loosen against the work piece
- Drill press vises with a horizontal orientation are ground on the base only, for horizontal work holding
- Stationary or fixed vises are used for machining straight surfaces. they can be fastened to the machine at either a parallel or at a right angle
- Standard spindle operations feature a continuous nut design for consistent jaw movement
- Cast iron is a heavy material that is malleable and extremely strong
- 11 in width
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 24W072 |
| Grainger | 24W072 |
-
Alternative Part Number13402
-
UNSPSC27112157
-
WarrantyLifetime
-
Catalog
Recently Viewed
Wilton® WL9-13402 Cam Action Drill Press Vise, 18-15/16 in L 6-5/16 in H, 6-3/16 in Jaw Opening, 600 to 1200 lb Capacity, Cast Iron
With the Wilton Cam Action Drill Press, a simple push or pull on the center bar knob sets the jaw in position
Wilton® 10016 Round Channel Machinist Vise With Swivel Base, Serrated Jaw, 6-1/2 in Jaw Opening, 4 in W Hardened Steel Jaw, 3-1/2 in D Throat
Proudly made in the USA, the machinist vise is designed to handle the most demanding clamping applications. Unlike most vises that have a fixed center nut the machinist round channel vise nut is anchored at the rear to provide straight line pull and even pressure resulting in greater durability. The round channel design also allows for a completely enclosed spindle and nut assembly which keeps debris out and lubrication in for a lifetime of smooth operation. The machinist vise is equipped with main jaws and a machined anvil work surface.
RIDGID® 32905, 228 Soil Pipe Assembly Tool, 1-1/2 to 8 in
Wilton® WL9-14243 Spark-Duty™ 400P Deep Throat Regular Duty C-Clamp, 3-1/4 in D Throat, 0 to 4-1/4 in Clamping, 3/4 in Screw
Wilton® Spark-Duty™ 400 series c-clamps are ideal for steel fabrication and industrial welding. Each boasts drop forged construction an ACME rolled copper plated spindle to resist welding spatter, replaceable Perma-Pads® and a V-grooved anvil for secure holding of all materials.
RIDGID® 32820 Heavy Duty Pipe Cutter, 1/8 to 2 in Nominal, Ergonomic Grip Handle
RIDGID® 32820 Heavy Duty Pipe Cutter, 1/8 to 2 in Nominal, Ergonomic Grip Handle
Wilton® WL9-14545 O Series Extra Heavy Duty C-Clamp, 2-3/8 in D Throat, 0 to 3-3/8 in Clamping, 0 to 3-3/8 in Jaw Opening, 7/8 in Screw
Wilton® Brute Force™ bridge c-clamps are ideal for heavy construction and fabrication. Brute force c-clamps boast a drop forged frame, black oxide coating and clamping pressure ranging up to 40,000 lbs. Spindles are full length, machined from a single piece of square, cold drawn steel tempered and hardened. Square spindle heads stand up to heavy wrench tightening.
